Journal Description
Journal of Composites Science
Journal of Composites Science
is an international, peer-reviewed, open access journal on the science and technology of composites published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, ESCI (Web of Science), Inspec, CAPlus / SciFinder, and other databases.
- Journal Rank: CiteScore - Q2 (Engineering (miscellaneous))
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 14.7 days after submission; acceptance to publication is undertaken in 2.9 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
3.3 (2022);
5-Year Impact Factor:
3.5 (2022)
Latest Articles
Mechanical Analysis and Simulation of Wood Textile Composites
J. Compos. Sci. 2024, 8(5), 190; https://doi.org/10.3390/jcs8050190 (registering DOI) - 18 May 2024
Abstract
Wood Textile Composites (WTCs) represent a new and innovative class of materials in the field of natural fiber composites. Consisting of fabrics made from willow wood strips (Salix americana) and polypropylene (PP), this material appears to be particularly suitable for structural
[...] Read more.
Wood Textile Composites (WTCs) represent a new and innovative class of materials in the field of natural fiber composites. Consisting of fabrics made from willow wood strips (Salix americana) and polypropylene (PP), this material appears to be particularly suitable for structural applications in lightweight construction. Since the threads of the fabric are significantly oversized compared to classic carbon or glass rovings, fundamental knowledge of the mechanical properties of the material is required. The aim of this study was to investigate whether WTCs exhibit classic behavior in terms of fiber composite theory and to classify them in relation to comparable composite materials. It was shown that WTCs meet all the necessary conditions for fiber-reinforced composites in tensile, bending, and compression tests and can be classified as natural-fiber-reinforced polypropylene composites. In addition, it was investigated whether delamination between the fiber and matrix can be simulated by using experimentally determined mechanical data as input. Using finite element analysis (FEA), it was shown that the shear stress components of a stress tensor in the area of the interface between the fiber and matrix are responsible for delamination in the composite material. It was also shown that the resistance to shear stress depends on the geometric conditions of the reinforcing fabric.
Full article
(This article belongs to the Special Issue Characterization and Modelling of Composites, Volume III)
►
Show Figures
Open AccessArticle
The Conversion of Li2SnO3 Li-Ion Hybrid Supercapacitors from Pastes Containing LiCl-SnCl2 Liquid Precursors Using an Atmospheric-Pressure Plasma Jet
by
Hong-Kai Chen, Heng-Min Chang, Bo-Yan Hong, Shuo-En Yu, I-Chih Ni, Chih-I Wu, Cheng-Che Hsu, I-Chun Cheng and Jian-Zhang Chen
J. Compos. Sci. 2024, 8(5), 189; https://doi.org/10.3390/jcs8050189 (registering DOI) - 18 May 2024
Abstract
We fabricate lithium tin-based oxide Li2SnO3 on carbon cloth from a gel-state precursor containing LiCl and SnCl2·2H2O using a nitrogen atmospheric-pressure plasma jet (APPJ). APPJ treatment provides both a high-temperature environment for the conversion of precursor
[...] Read more.
We fabricate lithium tin-based oxide Li2SnO3 on carbon cloth from a gel-state precursor containing LiCl and SnCl2·2H2O using a nitrogen atmospheric-pressure plasma jet (APPJ). APPJ treatment provides both a high-temperature environment for the conversion of precursor into Li2SnO3 and nitrogen plasma reactive species for electrode surface modification. Here, the best electrochemical performance for the Li2SnO3 Li-ion hybrid supercapacitors (Li–HSCs) is achieved with 480 s of APPJ processing. The areal capacity of the 480 s APPJ-processed Li2SnO3 Li–HSCs reached 46.113 mC/cm2. The results indicate that APPJ is an effective tool for the rapid conversion processing of Li2SnO3 electrodes for Li–HSCs.
Full article
(This article belongs to the Special Issue Prospect and Current State-of-the-Art Progress in Composites for High-Performance Supercapacitors)
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of the Incorporation of Olive Tree Pruning Sawdust in the Production of Lightweight Mortars
by
Marina Oya-Monzón, Dolores Eliche-Quesada and M. Dolores La Rubia
J. Compos. Sci. 2024, 8(5), 188; https://doi.org/10.3390/jcs8050188 - 17 May 2024
Abstract
In order to reduce energy consumption in buildings, this study used olive pruning sawdust (OTPS) instead of natural sand in the production of lightweight mortars. Different percentages of natural sand substitution were tested: 0, 10, 25, and 50% by volume of sand over
[...] Read more.
In order to reduce energy consumption in buildings, this study used olive pruning sawdust (OTPS) instead of natural sand in the production of lightweight mortars. Different percentages of natural sand substitution were tested: 0, 10, 25, and 50% by volume of sand over 7 and 28 days of curing time. Additionally, the influence of a chemical pretreatment in an aqueous solution of calcium hydroxide on the OTPS was also evaluated to mineralize the wood before its addition to the mortar mixture. Mortars with OTPS incorporations were characterized by volumetric shrinkage, bulk density, and capillary water absorption. Mechanical behavior was tested through compression and flexural tests. The addition of this byproduct decreased bulk density and increased mortar porosity. Pretreating olive pruning sawdust with an aqueous solution of calcium hydroxide was effective for wood mineralization, resulting in physical and mechanical properties superior to mortars without pretreatment. The results showed that a maximum addition of 10% by volume of OTPS treated with calcium hydroxide solution produced lighter mortars with similar mechanical properties to the control mortar. Adding higher amounts of pretreated olive pruning (25–50% by volume) led to a more pronounced deterioration of mechanical properties.
Full article
(This article belongs to the Special Issue Sustainable Composite Construction Materials, Volume II)
►▼
Show Figures
Figure 1
Open AccessArticle
Analytical and Experimental Behaviour of GFRP-Reinforced Concrete Columns under Fire Loading
by
Ana Almerich-Chulia, Pedro Martin-Concepcion, Jesica Moreno-Puchalt and Jose Miguel Molines-Cano
J. Compos. Sci. 2024, 8(5), 187; https://doi.org/10.3390/jcs8050187 - 16 May 2024
Abstract
Fire engineering endeavours to mitigate injury or the loss of life in the event of a fire. This is achieved primarily through fire prevention, containment, and extinguishment measures. Should prevention fail, the structural integrity of buildings, coupled with effective evacuation strategies, becomes paramount.
[...] Read more.
Fire engineering endeavours to mitigate injury or the loss of life in the event of a fire. This is achieved primarily through fire prevention, containment, and extinguishment measures. Should prevention fail, the structural integrity of buildings, coupled with effective evacuation strategies, becomes paramount. While glass fibre-reinforced polymer (GFRP) materials have demonstrated efficacy in reinforcing concrete elements, their performance under fire conditions, notably in comparison to steel, necessitates a deeper understanding for structural applications. This study experimentally and numerically investigates the fire performance of GFRP-reinforced concrete (RC) columns subjected to only fire load without additional external loads. The research aims to ascertain the fire resistance based on the thickness of the concrete coating and the ultimate tensile strength of GFRP rebars after 90 min of fire exposure. Four GFRP-RC columns were subjected to a standardized fire curve on all sides in the experimental program. In the analytical program, a theoretical model was developed using the heat transfer module of the COMSOL software. The results of both analyses were very close, indicating the reliability of the procedure used. Based on the findings, recommendations regarding the fire resistance of GFRP-RC columns were formulated for structural applications. Results from this research provide the civil engineering community with data that will help them continue using FRP materials as internal reinforcement for concrete.
Full article
(This article belongs to the Special Issue Polymer Composites and Fibers, Volume II)
►▼
Show Figures
Figure 1
Open AccessArticle
Influence of Silica Nanoparticles on the Physical Properties of Random Polypropylene
by
Evangelia Delli, Dimitrios Gkiliopoulos, Evangelia Vouvoudi, Dimitrios N. Bikiaris, Thomas Kehagias and Konstantinos Chrissafis
J. Compos. Sci. 2024, 8(5), 186; https://doi.org/10.3390/jcs8050186 - 16 May 2024
Abstract
Random polypropylene is considered an alternative material to regular polypropylene for applications where improved impact and creep resistance, as well as stiffness, are required. Random polypropylene nanocomposites reinforced with dimethyldichlorosilane-treated silica particles were prepared using meltmixing. The effect of varying the nanoparticles’ content
[...] Read more.
Random polypropylene is considered an alternative material to regular polypropylene for applications where improved impact and creep resistance, as well as stiffness, are required. Random polypropylene nanocomposites reinforced with dimethyldichlorosilane-treated silica particles were prepared using meltmixing. The effect of varying the nanoparticles’ content on the structural, mechanical, damping and thermal behavior of the nanocomposites was investigated. The results indicated the improved deformation potential, fracture toughness, and energy storage capacity of the matrix with increasing the filler content. It was observed that the use of high filler fractions limited the reinforcing efficiency of the SiO2 nanoparticles due to the formation of large agglomerates. The nanoparticles’ segregation was initially advised by modeling Young’s modulus but was also confirmed by electron imaging. Examination of the thermal properties of the nanocomposites indicated the limited effect of the nanoparticles on the melting behavior along with the thermal stability of the matrix. These results confirmed the usage of silica nanoparticles as a way of further improving the mechanical and thermomechanical properties of random polypropylene.
Full article
(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2024)
►▼
Show Figures
Figure 1
Open AccessCommunication
Properties of Composites Based on Polylactide Filled with Cork Filler
by
Mariusz Fabijański
J. Compos. Sci. 2024, 8(5), 185; https://doi.org/10.3390/jcs8050185 - 16 May 2024
Abstract
Introducing fillers into polymeric materials is one of the methods of modifying the properties or reducing the costs of polymeric materials. Thanks to their use, it is possible to obtain new materials with interesting mechanical and chemical properties. Some features are often improved
[...] Read more.
Introducing fillers into polymeric materials is one of the methods of modifying the properties or reducing the costs of polymeric materials. Thanks to their use, it is possible to obtain new materials with interesting mechanical and chemical properties. Some features are often improved among the new materials obtained, while others deteriorate. In this work, an attempt was made to obtain a polymer composite based on PLA filled with cork flour in amounts of 5%, 10%, 15%, 20% and 30% by weight. The processing and sample preparation process using injection molding technology was assessed and the basic mechanical properties were assessed. The research shows that it is possible to obtain PLA products with a cork filler without the mixing process on an extruder, but only by using an injection molding machine and appropriately selecting the parameters of the technological process. Tests of mechanical properties showed deterioration of parameters, but not to such an extent that the obtained composites were disqualified from use in products that are not subject to heavy mechanical loads. The undoubted advantage of the obtained materials is maintaining their so-called “green” character and thus the ability to biodegrade.
Full article
(This article belongs to the Special Issue Progress in Polymer Composites, Volume III)
►▼
Show Figures
Figure 1
Open AccessArticle
Mechanical Characterization of Hybrid Steel Wire Mesh/Basalt/Epoxy Fiber-Reinforced Polymer Composite Laminates
by
Mohamad Yusuf Bin Salim, Ali Farokhi Nejad, Mohd Yazid Yahya, Tobias Dickhut and Seyed Saeid Rahimian Koloor
J. Compos. Sci. 2024, 8(5), 184; https://doi.org/10.3390/jcs8050184 - 15 May 2024
Abstract
Hybrid composite materials have been widely used to advance the mechanical responses of fiber-reinforced composites by utilizing different types of fibers and fillers in a single polymeric matrix. This study incorporated three types of fibers: basalt woven fiber and steel (AISI304) wire meshes
[...] Read more.
Hybrid composite materials have been widely used to advance the mechanical responses of fiber-reinforced composites by utilizing different types of fibers and fillers in a single polymeric matrix. This study incorporated three types of fibers: basalt woven fiber and steel (AISI304) wire meshes with densities of 100 and 200. These fibers were mixed with epoxy resin to generate plain composite laminates. Three fundamental mechanical tests (tensile, compression, and shear) were conducted according to the corresponding ASTM standards to characterize the steel wire mesh/basalt/epoxy FRP composites used as plain composite laminates. To investigate the flexural behavior of the hybrid laminates, various layer configurations and thickness ratios were examined using a design of experiments (DoE) matrix. Hybrid samples were chosen for flexural testing, and the same procedure was employed to develop a finite element (FE) model. Material properties from the initial mechanical testing procedure were integrated into plain and hybrid composite laminate simulations. The second FE model simulated the behavior of hybrid laminates under flexural loading; this was validated through experimental data. The results underwent statistical analysis, highlighting the optimal configuration of hybrid composite laminates in terms of flexural strength and modulus; we found an increase of up to 25% in comparison with the plain composites. This research provides insights into the potential improvements offered by hybrid composite laminates, generating numerical models for predicting various laminate configurations produced using hybrid steel wire mesh/basalt/epoxy FRP composites.
Full article
(This article belongs to the Special Issue Hybrid Metal Matrix Composites)
►▼
Show Figures
Figure 1
Open AccessReview
Unveiling the Influential Factors and Heavy Industrial Applications of Graphene Hybrid Polymer Composites
by
Zulfiqar Ali, Saba Yaqoob, Jinhong Yu and Alberto D’Amore
J. Compos. Sci. 2024, 8(5), 183; https://doi.org/10.3390/jcs8050183 - 13 May 2024
Abstract
Graphene hybrid-filler polymer composites have emerged as prominent materials that revolutionize heavy industries. This review paper encapsulates an in-depth analysis of different influential factors, such as filler/graphene type, aspect ratios, dispersion methods, filler-matrix compatibility, fiber orientation, synergistic effects, different processing techniques, and post-curing
[...] Read more.
Graphene hybrid-filler polymer composites have emerged as prominent materials that revolutionize heavy industries. This review paper encapsulates an in-depth analysis of different influential factors, such as filler/graphene type, aspect ratios, dispersion methods, filler-matrix compatibility, fiber orientation, synergistic effects, different processing techniques, and post-curing conditions, which affect the processing and properties of graphene hybrid polymer composites, as well as their resultant applications. Additionally, it discusses the substantial role of graphene reinforcement with other fillers, such as carbon nanotubes, silica, nano-clays, and metal oxides, to produce functionalized hybrid polymer composites with synergistically enhanced tailored properties, offering solutions for heavy industries, including aerospace, automotive, electronics, and energy harvesting. This review concludes with some suggestions and an outlook on the future of these composite materials by emphasizing the need for continued research to fully optimize their potential.
Full article
(This article belongs to the Special Issue Progress in Polymer Composites, Volume III)
►▼
Show Figures
Figure 1
Open AccessArticle
Comparative Investigation of Thermal Properties Improvement of Nano-Enhanced Organic Phase Change Materials
by
Aravindh Madhavankutty Ambika, Gopi Kannan Kalimuthu and Veerakumar Chinnasamy
J. Compos. Sci. 2024, 8(5), 182; https://doi.org/10.3390/jcs8050182 - 13 May 2024
Abstract
Thermal energy storage (TES) using phase change materials (PCMs) is one of the potential solutions for stockpiling thermal energy and utilizing it for different applications, which results in effective energy usage. The main drawback of organic PCMs in practical applications is poor heat
[...] Read more.
Thermal energy storage (TES) using phase change materials (PCMs) is one of the potential solutions for stockpiling thermal energy and utilizing it for different applications, which results in effective energy usage. The main drawback of organic PCMs in practical applications is poor heat transfer due to low thermal conductivity (TC). Therefore, investigations into nano-enhanced PCMs are being explored to improve their thermophysical properties. In this work, the various thermophysical characteristics of nano-enhanced lauryl alcohol as a PCM were investigated using carbon-based and metallic nanoparticles. The results indicated that the addition of nanoparticles improved its thermal properties and affected other physical properties, such as viscosity. The latent heat was degraded with the addition of nanoparticles. The results revealed that by adding MWCNTs and CuO nanoparticles, a maximum of 82.6% and 49.6% improvement in TC was achieved, respectively. The maximum drop in latent heat during melting and freezing for the PCM with MWCNTs was about 10.1% and 9.3%, respectively, whereas for the PCM with CuO, they were about 11% and 10.3%, respectively. The lowest supercooling for the PCM with MWCNTs and CuO nanoparticles was 8.6 and 8.3 °C, respectively. The present work confirms that nano-enhanced PCMs can be a potential material for storing thermal energy for various applications.
Full article
(This article belongs to the Special Issue Composites for Energy Storage Applications, Volume II)
►▼
Show Figures
Figure 1
Open AccessArticle
New Accomplishments on the Equivalence of the First-Order Displacement-Based Zigzag Theories through a Unified Formulation
by
Marco Di Sciuva and Matteo Sorrenti
J. Compos. Sci. 2024, 8(5), 181; https://doi.org/10.3390/jcs8050181 - 12 May 2024
Abstract
The paper presents a critical review and new accomplishments on the equivalence of the first-order displacement-based zigzag theories for laminated composite and sandwich structures. Zigzag theories (ZZTs) have widely spread among researchers over the last few decades thanks to their accuracy in predicting
[...] Read more.
The paper presents a critical review and new accomplishments on the equivalence of the first-order displacement-based zigzag theories for laminated composite and sandwich structures. Zigzag theories (ZZTs) have widely spread among researchers over the last few decades thanks to their accuracy in predicting the response of multilayered composite and sandwich structures while retaining the simplicity of their underlying equivalent single-layer (ESL) theory. The displacement field consists of two main contributions: the global one, able to describe the overall structural behaviour, and the local layer-wise one that considers the transverse shear continuity at the layer interfaces that describe the “zigzag” displacement pattern typical of multilayered structures. In the framework of displacement-based linear ZZTs, various assumptions have been made on the local contribution, and different theories have been deduced. This paper aims to provide a unified formulation for first-order ZZTs, highlighting some common aspects and underlying equivalencies with existing formulations. The mathematical demonstrations and the numerical examples prove the equivalence of the approaches to characterising local zigzag enrichment. Finally, it is demonstrated that the kinematic assumptions are the discriminants of the ZZTs’ accuracy.
Full article
(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2024)
►▼
Show Figures
Figure 1
Open AccessArticle
Bolt-Hole Elongation of Woven Carbon-Epoxy Composite Plates and Joints Using the Digital Image Correlation Technique
by
Masoud Mehrabian, Aouni Lakis, Jr. and Rachid Boukhili
J. Compos. Sci. 2024, 8(5), 180; https://doi.org/10.3390/jcs8050180 - 12 May 2024
Abstract
The elongation of the bolt hole is an important parameter for assessing the failure of bolted joints. However, direct experimental measurement using strain gauges and extensometers is difficult. This article shows that digital image correlation (DIC) can overcome the difficulties and provide important
[...] Read more.
The elongation of the bolt hole is an important parameter for assessing the failure of bolted joints. However, direct experimental measurement using strain gauges and extensometers is difficult. This article shows that digital image correlation (DIC) can overcome the difficulties and provide important indications of the failure mechanisms of bolted joints. Hole elongation was measured using DIC in the following carbon/epoxy composite configurations: standard open-hole tensile (OHT) and filled-hole tensile (FHT), single-lap shear only-bolted (OB), and single-lap shear hybrid-bolted/bonded (HBB) joints. For each configuration, the hole-elongation changes were tracked for cross-ply (CP) and quasi-isotropic (QI) stacking sequences with two thicknesses. In the tensile load direction for OHT and FHT cases, CP showed a greater hole elongation than QI. However, the opposite trend was observed in the transverse direction. In OB joints, bypass loads contributed more to the hole elongation than bearing action. In HBB joints, it has been observed that the adhesive significantly reduces hole elongation, particularly for CP configurations. Moreover, it was found that in HBB joints, hole elongation was independent of laminate lay-up, while it was very determinative in OB joints.
Full article
(This article belongs to the Special Issue Recent Progress in Hybrid Composites)
►▼
Show Figures
Figure 1
Open AccessArticle
Technological Analysis of the Production of Nickel-Containing Composite Materials
by
Bauyrzhan Kelamanov, Dauren Yessengaliyev, Otegen Sariev, Askhat Akuov, Yerulan Samuratov, Talgat Zhuniskaliyev, Yerbol Kuatbay, Yerbol Mukhambetgaliyev, Olga Kolesnikova, Assel Zhumatova, Zukhra Karaidarova and Assylbek Abdirashit
J. Compos. Sci. 2024, 8(5), 179; https://doi.org/10.3390/jcs8050179 - 12 May 2024
Abstract
The article presents the results of obtaining a composite material by sintering nickel-containing raw materials mixed with carbon-containing materials, namely using coke and semi-coke. The sintering process was performed at a charge layer height of 240 mm and the temperature of the lower
[...] Read more.
The article presents the results of obtaining a composite material by sintering nickel-containing raw materials mixed with carbon-containing materials, namely using coke and semi-coke. The sintering process was performed at a charge layer height of 240 mm and the temperature of the lower layer was T = 1200 °C. The results of the sieve analysis showed (a fraction of 10 mm) that the yield of a suitable composite material using coke was 68.3% and with semi-coke 67.0%. The average nickel and chromium content in the composite materials was 1.42% and 3.07%, accordingly. As a result of determining the strength characteristics of the obtained composite materials with various reducing agents by dropping from a height of 2 m onto a steel pallet, it was found that the obtained composite materials have high mechanical properties in terms of strength of 81% and 89.2%. The results of the elemental composition at the studied points and the thermal analysis of the studied composite material are presented. The mineralogical composition of the composite material is presented in the form of serpentine and nontronite, and the empty rock is made of quartz and talc. The activation energy of thermal analysis by the method of non-isothermal kinetics were calculated. The results of experiments on the production of composite materials from nickel-containing raw materials will be recommended for obtaining the optimal composition of composite materials at the stage of pilot tests and industrial development of the developed technology for processing nickel ores of the Republic of Kazakhstan. For the processing of nickel-poor nickel ores, it is of great importance to obtain optimal technological and technical and economic indicators that ensure low cost of nickel in the resulting product.
Full article
(This article belongs to the Special Issue Metal Composites, Volume II)
►▼
Show Figures
Figure 1
Open AccessArticle
Development of New Polyimide/Spirulina Hybrid Materials: Preparation and Characterization
by
Magdalena Aflori, Diana Serbezeanu, Alina Mirela Ipate, Adina Maria Dobos and Daniela Rusu
J. Compos. Sci. 2024, 8(5), 178; https://doi.org/10.3390/jcs8050178 - 12 May 2024
Abstract
This study presents the synthesis and characterization of polyimide (PI-2) films incorporated with spirulina powder for potential biomedical applications. The synthesis of PI-2 was achieved through a two-step polycondensation reaction using N-methyl-2-pyrrolidone (NMP) as the solvent. The incorporation of spirulina was systematically varied
[...] Read more.
This study presents the synthesis and characterization of polyimide (PI-2) films incorporated with spirulina powder for potential biomedical applications. The synthesis of PI-2 was achieved through a two-step polycondensation reaction using N-methyl-2-pyrrolidone (NMP) as the solvent. The incorporation of spirulina was systematically varied to investigate its effects on the structural and surface properties of the hybrid materials. Scanning electron microscopy revealed a tightly bound interface between spirulina and the PI-2 matrix, indicating effective dispersion and strong interfacial adhesion. Profilometry and Raman spectroscopy confirmed the homogeneous integration of spirulina within the polymer matrix, with resulting variations in surface roughness and chemistry. Contact angle measurements demonstrated altered wettability characteristics, with increased hydrophilicity observed with spirulina incorporation. Furthermore, blood component interaction studies indicated the variations in adhesion behavior observed for red blood cells, platelets, and plasma proteins. Water uptake studies revealed enhanced absorption capacity in PI-2 films loaded with spirulina, highlighting their potential suitability for applications requiring controlled hydration. Overall, this comprehensive characterization elucidates the potential of PI-2/spirulina hybrid materials for diverse biomedical applications, offering tunable properties that can be tailored to specific requirements.
Full article
(This article belongs to the Special Issue Progress in Polymer Composites, Volume III)
►▼
Show Figures
Figure 1
Open AccessArticle
Verification of the Inverse Scale Effect Hypothesis on Viscosity and Diffusion by Azo-Amino Acid Schiff Base Copper Complexes
by
Yoshitora Wadayama, Ai Kaneda, Taiga Imae, Daisuke Nakane and Takashiro Akitsu
J. Compos. Sci. 2024, 8(5), 177; https://doi.org/10.3390/jcs8050177 - 10 May 2024
Abstract
Microdroplets generated in microfluidic devices are attracting attention as a new chemical reaction field and are expected to improve reactivity. One of the effects of microscaling is that the ratio of the force that acts on the diffusion and movement of substances to
[...] Read more.
Microdroplets generated in microfluidic devices are attracting attention as a new chemical reaction field and are expected to improve reactivity. One of the effects of microscaling is that the ratio of the force that acts on the diffusion and movement of substances to gravity is different from that of ordinary solvents. Recently, we proposed a hypothesis for determining reaction acceleration through micro-miniaturization: If a reaction is inhibited by setting the volume and viscosity of the solution to conditions that are unfavorable to the reaction on a normal scale, that reaction can be promoted in microfluidics. Therefore, for the purpose of this verification, (1) we used an amino acid Schiff base copper(II) complex with an azobenzene group to demonstrate the polarization-induced orientation in a polymer film (the redirection that is mechanically maintained in a soft matter matrix). Numerical data on optical anisotropy parameters were reported. (2) When the reaction is confirmed to be promoted in laminar flow in a microfluidic device and its azo derivative, a copper(II) complex is used to increase the solvent viscosity or diffusion during synthesis on a normally large scale. We will obtain and discuss data on the investigation of changing the solvent volume as a region. The range of experimental conditions for volume and viscosity did not lead to an improvement in synthetic yield, nor did (3) the comparison of solvents and viscosity for single-crystal growth of amino acid Schiff base copper(II) complexes having azobenzene groups. A solvent whose viscosity was measured was used, but microcrystals were obtained using the diffusion method.
Full article
(This article belongs to the Special Issue Recent Progress in Hybrid Composites)
►▼
Show Figures
Figure 1
Open AccessArticle
Influence of Physical–Mechanical Strength and Water Absorption Capacity on Sawdust–Waste Paper–Recycled Plastic Hybrid Composite for Ceiling Tile Application
by
Berhanu Tolessa Amena and Nazia Hossain
J. Compos. Sci. 2024, 8(5), 176; https://doi.org/10.3390/jcs8050176 - 10 May 2024
Abstract
In recent times, there has been a notable surge in the interest in promoting environmentally conscious products, particularly within the building industry where the focus has shifted towards sustainable materials. In this study, as a sustainable building material, ceiling tiles have been fabricated
[...] Read more.
In recent times, there has been a notable surge in the interest in promoting environmentally conscious products, particularly within the building industry where the focus has shifted towards sustainable materials. In this study, as a sustainable building material, ceiling tiles have been fabricated as a composite board containing waste materials, namely waste paper, sawdust, recycled polyethylene terephthalate (PET), and epoxy resin, and characterized comprehensively through physical and mechanical tests, density, thickness swelling (TS), modulus of elasticity (MOE), modulus of rupture (MOR), and flexural strength (FS) for product stability. A total of nine composites were fabricated with different ratios through molding techniques, and the characterization results were compared to determine the optimized stable ratio of composite composition. The composition of 25% waste paper, 15% sawdust, 10% recycled PET, and 50% epoxy resin presented the maximum FS compared to the other composite ratios. Water absorption (WA) and thickness swelling were evaluated after immersion durations of 1–24 h. The findings revealed that as the density increased, the sawdust content within the matrix decreased from 25–35%. Concurrently, an increase in recycled PET content resulted in decreased water absorption and thickness swelling. Significantly, the MOE, MOR, and FS demonstrated optimal values at 864.256 N/mm2, 12.786 N/mm2, and 4.64 MPa, respectively. These observations represent the excellent qualities of this hybrid composite board, particularly in terms of sustainability, stability, and water absorption capacity. Moreover, its lightweight nature and ability to support ceiling loads further enhance its appeal for construction applications. This study not only advances the discourse on sustainable construction materials but also fosters opportunities for broader acceptance and innovation within the industry.
Full article
(This article belongs to the Special Issue Recycled Polymer Composites: Futuristic Sustainable Material)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Analysis of Intact/Delaminated Composite and Sandwich Beams Using a Higher-Order Modeling Technique
by
Yuan Feng, Abdul Hamid Sheikh and Guanzhen Li
J. Compos. Sci. 2024, 8(5), 175; https://doi.org/10.3390/jcs8050175 - 10 May 2024
Abstract
A simple higher-order model (HOM) is presented in this study for the bending analysis of an intact or delaminated composite and sandwich beam. This model adopts the concept of sub-laminates to simulate multilayered structures, and each sub-laminate takes cubic variation for axial displacement
[...] Read more.
A simple higher-order model (HOM) is presented in this study for the bending analysis of an intact or delaminated composite and sandwich beam. This model adopts the concept of sub-laminates to simulate multilayered structures, and each sub-laminate takes cubic variation for axial displacement and linear variation for transverse displacement through the thickness. A sub-laminate possesses displacement components at its surfaces (bottom and top) that provide a straightforward way to improve the accuracy of prediction by stacking several sub-laminates. Thus, analysts will have the flexibility to balance the computational cost and the accuracy by selecting an appropriate sub-lamination scheme. The proposed model was implemented by developing a C0 beam element that has only displacement unknowns. The model was used to solve numerical examples of composite and sandwich beams to demonstrate its performance.
Full article
(This article belongs to the Special Issue Characterization and Modelling of Composites, Volume III)
►▼
Show Figures
Figure 1
Open AccessArticle
An Experimental Study Incorporating Carbon Fiber Composite Bars and Wraps for Concrete Performance and Failure Insight
by
Ali Akbarpour, Jeffery Volz and Shreya Vemuganti
J. Compos. Sci. 2024, 8(5), 174; https://doi.org/10.3390/jcs8050174 - 9 May 2024
Abstract
Corrosion of conventional steel reinforcement is responsible for numerous structurally deficient bridges, which is a multi-billion-dollar challenge that creates a vicious cycle of maintenance, repair, and replacement of infrastructure. Repair of existing structures with fiber-reinforced polymer (FRP) has become widespread due to multiple
[...] Read more.
Corrosion of conventional steel reinforcement is responsible for numerous structurally deficient bridges, which is a multi-billion-dollar challenge that creates a vicious cycle of maintenance, repair, and replacement of infrastructure. Repair of existing structures with fiber-reinforced polymer (FRP) has become widespread due to multiple advantages. Carbon FRP’s superior tensile strength and stiffness make it particularly effective in shear and flexural strengthening of reinforced concrete (RC) beams. This experimental study incorporates carbon fiber polymer composite bars and wraps to study and report on the flexural behavior of RC beams. By employing a combination of CFRP bar and wrap for strengthening RC beams, this study observed an approximate 95% improvement in flexural load capacity relative to control RC beams without strengthening. This substantial enhancement highlights the effectiveness of integrating CFRP in structural applications. Nevertheless, the key observation is the failure mode due to this combination providing significant insights into the changes facilitated by this combination approach.
Full article
(This article belongs to the Special Issue Carbon Fiber Composites, Volume III)
►▼
Show Figures
Figure 1
Open AccessArticle
Computational Investigation of the Mechanical Response of a Bioinspired Nacre-like Nanocomposite under Three-Point Bending
by
Xingzi Yang, Md Jalal Uddin Rumi and Xiaowei Zeng
J. Compos. Sci. 2024, 8(5), 173; https://doi.org/10.3390/jcs8050173 - 7 May 2024
Abstract
Natural biological nanocomposites, like nacre, demonstrate extraordinary fracture toughness, surpassing their base materials, attributed to their intricate staggered hierarchical architectures integrating hard and soft phases. The enhancement of toughness in these composites is often linked to the crack-deflection mechanism. Leveraging the core design
[...] Read more.
Natural biological nanocomposites, like nacre, demonstrate extraordinary fracture toughness, surpassing their base materials, attributed to their intricate staggered hierarchical architectures integrating hard and soft phases. The enhancement of toughness in these composites is often linked to the crack-deflection mechanism. Leveraging the core design principles that enhance durability, resilience, and robustness in organic materials, this paper describes the use of computational modeling and simulation to perform a three-point bending test on a 3D staggered nanocomposite intentionally crafted to mimic the detailed microstructure of nacre. We adopted a previously proposed interfacial zone model that conceptualizes the “relatively soft” layer as an interface between the “hard” mineral tablets and the microstructure’s interlayer spaces to examine how the microstructure and interface characteristics affect the mechanical responses and failure mechanisms. By comparing the model’s predictions with experimental data on natural nacre, the simulations unveil the mechanisms of tablet separation through adjacent layer sliding and crack deflection across interfacial zones. This study offers a robust numerical method for investigating the fracture toughening mechanisms and damage evolution and contributes to a deeper understanding of the complex interplays within biomimetic materials.
Full article
(This article belongs to the Special Issue Manufacturing, Characterization and Biomedical Applications of Advanced Micro/Nanocomposites)
►▼
Show Figures
Figure 1
Open AccessReview
Quality of Life of Dialysis Patients: Exploring the Influence of Membrane Hemocompatibility and Dialysis Practices on Psychosocial and Physical Symptoms
by
Victoria Doan, Ahmed Shoker and Amira Abdelrasoul
J. Compos. Sci. 2024, 8(5), 172; https://doi.org/10.3390/jcs8050172 - 7 May 2024
Abstract
Hemodialysis (HD) is a life-sustaining membrane-based therapy that is essential for managing kidney failure. However, it can have significant physical and psychological effects on patients due to chronic or acute consequences related to membrane bioincompatibility. End-stage renal disease (ESRD) patients on hemodialysis have
[...] Read more.
Hemodialysis (HD) is a life-sustaining membrane-based therapy that is essential for managing kidney failure. However, it can have significant physical and psychological effects on patients due to chronic or acute consequences related to membrane bioincompatibility. End-stage renal disease (ESRD) patients on hemodialysis have a high incidence of psychiatric illness, particularly depression and anxiety disorders, and poor quality of life has been observed. Dialysis can also lead to physical symptoms of its own, such as fatigue, loss of appetite, anemia, low blood pressure, and fluid overload, in addition to the symptoms associated with kidney failure. Therefore, this critical review aims to comprehensively understand the impact of dialysis membrane bioincompatibility and the use of varying molecular weight cut-off membranes on the physical and psychological symptoms experienced by dialysis patients. We analyzed the latest research on the correlation between major inflammatory biomarkers released in patients’ blood due to membrane incompatibility, as well as the critical influence of low levels of hemoglobin and vital proteins such as human serum albumin due to the use of high-cut-off membranes and correlated these factors with the physical and psychological symptoms experienced by dialysis patients. Furthermore, our study aims to provide valuable insights into the impact of dialysis on critical symptoms, higher hospitalization rates, and the quality of life of First Nations, as well as child and youth dialysis patients, in addition to diabetic dialysis patients. Our goal is to identify potential interventions aiming to optimize the dialysis membrane and minimize its negative effects on patients, ultimately improving their well-being and long-term outcomes.
Full article
(This article belongs to the Section Biocomposites)
►▼
Show Figures
Figure 1
Open AccessArticle
Thermomechanical Responses and Energy Conversion Efficiency of a Hybrid Thermoelectric–Piezoelectric Layered Structure
by
Zhihe Jin and Jiashi Yang
J. Compos. Sci. 2024, 8(5), 171; https://doi.org/10.3390/jcs8050171 - 6 May 2024
Abstract
This paper develops a thermoelectric (TE)–piezoelectric (PE) hybrid structure with the PE layer acting as both a support membrane and a sensor for the TE film for microelectronics applications. The TE and PE layers are assumed to be perfectly bonded mechanically and thermally
[...] Read more.
This paper develops a thermoelectric (TE)–piezoelectric (PE) hybrid structure with the PE layer acting as both a support membrane and a sensor for the TE film for microelectronics applications. The TE and PE layers are assumed to be perfectly bonded mechanically and thermally but electrically shielded and insulated with each other. The thermo-electro-mechanical responses of the hybrid bilayer under the TE generator operation conditions are obtained, and the influence of the PE layer on the TE energy conversion efficiency is investigated. The numerical results for a Bi2Te3/PZT-5H bilayer structure show that large compressive stresses develop in both the PE and TE layers. With a decrease in the PE layer thickness, the magnitude of the maximum compressive stress in the PE layer increases whereas the maximum magnitude of the stress in the TE layer decreases. The numerical result of the TE energy conversion efficiency shows that increasing the PE layer thickness leads to lower energy conversion efficiencies. A nearly 40% reduction in the peak efficiency is observed with a PE layer of the same thickness as that of the TE layer. These results suggest that design of TE films with supporting/sensing membranes must consider both aspects of energy conversion efficiency and the thermomechanical reliability of both the TE and PE layers.
Full article
(This article belongs to the Special Issue Theoretical and Computational Investigation on Composite Materials)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- J. Compos. Sci. Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Energies, J. Compos. Sci., Materials, Metals
Energy-Saving and Emission Reduction in Metallurgy
Topic Editors: Farshid Pahlevani, Smitirupa BiswalDeadline: 31 May 2024
Topic in
Applied Sciences, Crystals, J. Compos. Sci., Materials, Metals
Modern Material Technologies Intended for Industrial Applications
Topic Editors: Tomasz Tański, Andrzej N. Wieczorek, Marcin StaszukDeadline: 30 June 2024
Topic in
Energies, J. Compos. Sci., Materials, Nanomaterials, Polymers
Advanced Polymeric Composites: Processing, Characterization and Mechanical Behavior
Topic Editors: Jude O. Iroh, Derrick Dean, Kirill Levine, Ramakrishnan RajagopalanDeadline: 31 August 2024
Topic in
Fibers, J. Compos. Sci., JMMP, Materials, Polymers
Advanced Composites Manufacturing and Plastics Processing
Topic Editors: Patricia Krawczak, Ludwig CardonDeadline: 31 December 2024
Conferences
Special Issues
Special Issue in
J. Compos. Sci.
Functional Composites: Fabrication and Application
Guest Editors: Jiunn Jer Hwang, Li-Huei LinDeadline: 20 May 2024
Special Issue in
J. Compos. Sci.
Advances in Graphene-Based Composites: From Synthesis to Applications
Guest Editors: Niranjan Patra, Sayan GangulyDeadline: 11 June 2024
Special Issue in
J. Compos. Sci.
Additive Manufacturing of Advanced Composites
Guest Editor: Yuan ChenDeadline: 30 June 2024
Special Issue in
J. Compos. Sci.
Probabilistic Entropy in Analysis of Composite Materials, Volume II
Guest Editor: Marcin KamińskiDeadline: 31 July 2024