Journal Description
Journal of Manufacturing and Materials Processing
Journal of Manufacturing and Materials Processing
is an international, peer-reviewed, open access journal on the scientific fundamentals and engineering methodologies of manufacturing and materials processing published bimonthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, ESCI (Web of Science), Inspec, CAPlus / SciFinder, and other databases.
- Journal Rank: CiteScore - Q1 (Mechanical Engineering)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 14.2 days after submission; acceptance to publication is undertaken in 2.9 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
3.2 (2022);
5-Year Impact Factor:
3.6 (2022)
Latest Articles
Real-Size Reconstruction of Porous Media Using the Example of Fused Filament Fabrication 3D-Printed Rock Analogues
J. Manuf. Mater. Process. 2024, 8(3), 104; https://doi.org/10.3390/jmmp8030104 - 17 May 2024
Abstract
The multi-scale study of rock properties is a necessary step in the planning of oil and gas reservoir developments. The amount of core samples available for research is usually limited, and some of the samples can be distracted. The investigation of core reconstruction
[...] Read more.
The multi-scale study of rock properties is a necessary step in the planning of oil and gas reservoir developments. The amount of core samples available for research is usually limited, and some of the samples can be distracted. The investigation of core reconstruction possibilities is an important task. An approach to the real-size reconstruction of porous media with a given (target) porosity and permeability by controlling the parameters of FFF 3D printing using CT images of the original core is proposed. Real-size synthetic core specimens based on CT images were manufactured using FFF 3D printing. The possibility of reconstructing the reservoir properties of a sandstone core sample was proven. The results of gas porometry measurements showed that the porosity of specimens No.32 and No.46 was 13.5% and 12.8%, and the permeability was 442.3 mD and 337.8 mD, respectively. The porosity of the original core was 14% and permeability was 271 mD. It was found that changing the layer height and nozzle diameter, as well as the retract and restart distances, has a direct effect on the porosity and permeability of synthetic specimens. This study shows that porosity and permeability of synthetic specimens depend on the flow of the material and the percentage of overlap between the infill and the outer wall.
Full article
Open AccessArticle
Revealing the Mechanisms of Smoke during Electron Beam–Powder Bed Fusion by High-Speed Synchrotron Radiography
by
Jihui Ye, Nick Semjatov, Pidassa Bidola, Greta Lindwall and Carolin Körner
J. Manuf. Mater. Process. 2024, 8(3), 103; https://doi.org/10.3390/jmmp8030103 - 17 May 2024
Abstract
►▼
Show Figures
Electron beam–powder bed fusion (PBF-EB) is an additive manufacturing process that utilizes an electron beam as the heat source to enable material fusion. However, the use of a charge-carrying heat source can sometimes result in sudden powder explosions, usually referred to as “Smoke”,
[...] Read more.
Electron beam–powder bed fusion (PBF-EB) is an additive manufacturing process that utilizes an electron beam as the heat source to enable material fusion. However, the use of a charge-carrying heat source can sometimes result in sudden powder explosions, usually referred to as “Smoke”, which can lead to process instability or termination. This experimental study investigated the initiation and propagation of Smoke using in situ high-speed synchrotron radiography. The results reveal two key mechanisms for Smoke evolution. In the first step, the beam–powder bed interaction creates electrically isolated particles in the atmosphere. Subsequently, these isolated particles get charged either by direct irradiation by the beam or indirectly by back-scattered electrons. These particles are accelerated by electric repulsion, and new particles in the atmosphere are produced when they impinge on the powder bed. This is the onset of the avalanche process known as Smoke. Based on this understanding, the dependence of Smoke on process parameters such as beam returning time, beam diameter, etc., can be rationalized.
Full article
Figure 1
Open AccessArticle
Digital Twin Modeling for Smart Injection Molding
by
Sara Nasiri, Mohammad Reza Khosravani, Tamara Reinicke and Jivka Ovtcharova
J. Manuf. Mater. Process. 2024, 8(3), 102; https://doi.org/10.3390/jmmp8030102 - 17 May 2024
Abstract
►▼
Show Figures
In traditional injection molding, each level of the process has its own monitoring and improvement initiatives. But in the upcoming industrial revolution, it is important to establish connections and communication among all stages, as changes in one stage might have an impact on
[...] Read more.
In traditional injection molding, each level of the process has its own monitoring and improvement initiatives. But in the upcoming industrial revolution, it is important to establish connections and communication among all stages, as changes in one stage might have an impact on others. To address this issue, digital twins (DTs) are introduced as virtual models that replicate the entire injection molding process. This paper focuses on the data and technology needed to build a DT model for injection molding. Each stage can have its own DT, which are integrated into a comprehensive model of the process. DTs enable the smart automation of production processes and data collection, reducing manual efforts in supervising and controlling production systems. However, implementing DTs is challenging and requires effort for conception and integration with the represented systems. To mitigate this, the current work presents a model for systematic knowledge-based engineering for the DTs of injection molding. This model includes fault detection systems, 3D printing, and system integration to automate development activities. Based on knowledge engineering, data analysis, and data mapping, the proposed DT model allows fault detection, prognostic maintenance, and predictive manufacturing.
Full article
Figure 1
Open AccessArticle
A Study on Powder Spreading Quality in Powder Bed Fusion Processes Using Discrete Element Method Simulation
by
Panagiotis Avrampos and George-Christopher Vosniakos
J. Manuf. Mater. Process. 2024, 8(3), 101; https://doi.org/10.3390/jmmp8030101 - 16 May 2024
Abstract
Powder deposition is a very important aspect of PBF-based additive manufacturing processes. Discrete Element Method (DEM) is commonly utilized by researchers to examine the physically complex aspects of powder-spreading methods. This work focuses on vibration-assisted doctor blade powder recoating. The aim of this
[...] Read more.
Powder deposition is a very important aspect of PBF-based additive manufacturing processes. Discrete Element Method (DEM) is commonly utilized by researchers to examine the physically complex aspects of powder-spreading methods. This work focuses on vibration-assisted doctor blade powder recoating. The aim of this work is to use experiment-verified DEM simulations in combination with Taguchi Design of Experiments (DoE) to identify optimum spreading parameters based on robust layer quality criteria. The verification of the used powder model is performed via angle of repose and angle of avalanche simulation–experiment cross-checking. Then, four criteria, namely layer thickness deviation, surface coverage ratio, surface root-mean-square roughness and true packing density, are defined. It has been proven that the doctor blade’s translational speed plays the most important role in defining the quality of the deposited layer. The true packing density was found to be unaffected by the spreading parameters. The vertical vibration of the doctor blade recoater was found to have a beneficial effect on the quality of the deposited layer. Ultimately, a weighted mean quality criteria analysis is mapped out. Skewness and kurtosis were proven to function as effective indicators of layer quality, showing a linear relation to the weighted means of the defined quality criteria. The specific weights that optimize this linearity were identified.
Full article
Open AccessArticle
Faster Evaluation of Dimensional Machine Performance in Additive Manufacturing by Using COMPAQT Parts
by
Laurent Spitaels, Endika Nieto Fuentes, Valentin Dambly, Edouard Rivière-Lorphèvre, Pedro-José Arrazola and François Ducobu
J. Manuf. Mater. Process. 2024, 8(3), 100; https://doi.org/10.3390/jmmp8030100 - 16 May 2024
Abstract
Knowing the tolerance interval capabilities (TICs) of a manufacturing process is of prime interest, especially if specifications link the manufacturer to a customer. These TICs can be determined using the machine performance concept of ISO 22514. However, few works have applied this to
[...] Read more.
Knowing the tolerance interval capabilities (TICs) of a manufacturing process is of prime interest, especially if specifications link the manufacturer to a customer. These TICs can be determined using the machine performance concept of ISO 22514. However, few works have applied this to Additive Manufacturing printers, while testing most of the printing area as recommended takes a very long time (nearly 1 month is common). This paper, by proposing a novel part design called COMPAQT (Component for Machine Performances Assessment in Quick Time), aims at giving the same level of printing area coverage, while keeping the manufacturing time below 24 h. The method was successfully tested on a material extrusion printer. It allowed the determination of potential and real machine tolerance interval capabilities. Independently of the feature size, those aligned with the X axis achieved lower TICs than those aligned with the Y axis, while the Z axis exhibited the best performance. The measurements specific to one part exhibited a systematic error centered around 0 mm ± 0.050 mm, while those involving two parts reached up to 0.314 mm of deviation. COMPAQT can be used in two applications: evaluating printer tolerance interval capabilities and tracking its long-term performance by incorporating it into batches of other parts.
Full article
(This article belongs to the Special Issue Design, Processes and Materials for Additive Manufacturing)
►▼
Show Figures
Figure 1
Open AccessArticle
Exploring Multi-Armed Bandit (MAB) as an AI Tool for Optimising GMA-WAAM Path Planning
by
Rafael Pereira Ferreira, Emil Schubert and Américo Scotti
J. Manuf. Mater. Process. 2024, 8(3), 99; https://doi.org/10.3390/jmmp8030099 - 15 May 2024
Abstract
Conventional path-planning strategies for GMA-WAAM may encounter challenges related to geometrical features when printing complex-shaped builds. One alternative to mitigate geometry-related flaws is to use algorithms that optimise trajectory choices—for instance, using heuristics to find the most efficient trajectory. The algorithm can assess
[...] Read more.
Conventional path-planning strategies for GMA-WAAM may encounter challenges related to geometrical features when printing complex-shaped builds. One alternative to mitigate geometry-related flaws is to use algorithms that optimise trajectory choices—for instance, using heuristics to find the most efficient trajectory. The algorithm can assess several trajectory strategies, such as contour, zigzag, raster, and even space-filling, to search for the best strategy according to the case. However, handling complex geometries by this means poses computational efficiency concerns. This research aimed to explore the potential of machine learning techniques as a solution to increase the computational efficiency of such algorithms. First, reinforcement learning (RL) concepts are introduced and compared with supervised machining learning concepts. The Multi-Armed Bandit (MAB) problem is explained and justified as a choice within the RL techniques. As a case study, a space-filling strategy was chosen to have this machining learning optimisation artifice in its algorithm for GMA-AM printing. Computational and experimental validations were conducted, demonstrating that adding MAB in the algorithm helped to achieve shorter trajectories, using fewer iterations than the original algorithm, potentially reducing printing time. These findings position the RL techniques, particularly MAB, as a promising machining learning solution to address setbacks in the space-filling strategy applied.
Full article
(This article belongs to the Special Issue Advances in Directed Energy Deposition Additive Manufacturing)
►▼
Show Figures
Figure 1
Open AccessArticle
Transfer Learning-Based Artificial Neural Network for Predicting Weld Line Occurrence through Process Simulations and Molding Trials
by
Giacomo Baruffa, Andrea Pieressa, Marco Sorgato and Giovanni Lucchetta
J. Manuf. Mater. Process. 2024, 8(3), 98; https://doi.org/10.3390/jmmp8030098 - 9 May 2024
Abstract
Optimizing process parameters to minimize defects remains an important challenge in injection molding (IM). Machine learning (ML) techniques offer promise in this regard, but their application often requires extensive datasets. Transfer learning (TL) emerges as a solution to this problem, leveraging knowledge from
[...] Read more.
Optimizing process parameters to minimize defects remains an important challenge in injection molding (IM). Machine learning (ML) techniques offer promise in this regard, but their application often requires extensive datasets. Transfer learning (TL) emerges as a solution to this problem, leveraging knowledge from related tasks to enhance model training and performance. This study explores TL’s viability in predicting weld line visibility in injection-molded components using artificial neural networks (ANNs). TL techniques are employed to transfer knowledge between datasets related to different components. Furthermore, both source datasets obtained from simulations and experimental tests are used during the study. In order to use process simulations to obtain data regarding the presence of surface defects, it was necessary to correlate an output variable of the simulations with the experimental observations. The results demonstrate TL’s efficacy in reducing the data required for training predictive models, with simulations proving to be a cost-effective alternative to experimental data. TL from simulations achieves comparable predictive metric values to those of the non-pre-trained network, but with an 83% reduction in the required data for the target dataset. Overall, transfer learning shows promise in streamlining injection molding optimization and reducing manufacturing costs.
Full article
(This article belongs to the Special Issue Advances in Injection Molding: Process, Materials and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Development of Multi-Part Field-Shapers for Magnetic Pulse Welding Using Nanostructured Cu-Nb Composite
by
Evgeny Zaytsev, Vasiliy Krutikov, Alexey Spirin and Sergey Paranin
J. Manuf. Mater. Process. 2024, 8(3), 97; https://doi.org/10.3390/jmmp8030097 - 5 May 2024
Abstract
Magnetic pulse welding (MPW) employs a strong pulsed magnetic field to accelerate parts against each other, thus forming an impact joint. Single-turn tool coils and field-shapers (FSs) used in MPW operate under the most demanding conditions, such as magnetic fields of 40–50 T
[...] Read more.
Magnetic pulse welding (MPW) employs a strong pulsed magnetic field to accelerate parts against each other, thus forming an impact joint. Single-turn tool coils and field-shapers (FSs) used in MPW operate under the most demanding conditions, such as magnetic fields of 40–50 T with periods lasting tens of microseconds. With the use of conventional copper and bronze coils, intense thermo-mechanical stresses lead to the rapid degradation of the working bore. This work aimed to improve the efficiency of field-shapers and focused on the development of two- and four-slit FSs with a nanocomposite Cu 18Nb brazed wire acting as an inner current-carrying layer. The measured ratios of the magnetic field to the discharge current were 56.3 and 50.6 T/MA for the two- and four-slit FSs, respectively. FEM calculations of the magnetic field generated showed variations of 6–9% and 3% for the two- and four-slit FSs, respectively. The ovality percentages following copper tube compression were 27% and 7% for the two- and four-slit FSs, respectively. The measured deviations in the weld-joining length were 11% and 1.4% in the two- and four-slit FSs, respectively. Compared to the previous experiments on an entirely steel inductor, the novel FS showed significantly better results in terms of its efficiency and the homogeneity of its magnetic field.
Full article
(This article belongs to the Special Issue Advances in Welding Technology)
►▼
Show Figures
Figure 1
Open AccessReview
A Review on Fusion Welding of Dissimilar Ferritic/Austenitic Steels: Processing and Weld Zone Metallurgy
by
Fabio Giudice, Severino Missori, Cristina Scolaro and Andrea Sili
J. Manuf. Mater. Process. 2024, 8(3), 96; https://doi.org/10.3390/jmmp8030096 - 4 May 2024
Abstract
Dissimilar welds between ferritic and austenitic steels represent a good solution for exploiting the best performance of stainless steels at high and low temperatures and in aggressive environments, while minimizing costs. Therefore, they are widely used in nuclear and petrochemical plants; however, due
[...] Read more.
Dissimilar welds between ferritic and austenitic steels represent a good solution for exploiting the best performance of stainless steels at high and low temperatures and in aggressive environments, while minimizing costs. Therefore, they are widely used in nuclear and petrochemical plants; however, due to the different properties of the steels involved, the welding process can be challenging. Fusion welding can be specifically applied to connect low-carbon or low-alloy steels with high-alloy steels, which have similar melting points. The welding of thick plates can be performed with an electric arc in multiple passes or in a single pass by means of laser beam equipment. Since the microstructure and, consequently, the mechanical properties of the weld are closely related to the composition, the choice of the filler metal and processing parameters, which in turn affect the dilution rate, plays a fundamental role. Numerous technical solutions have been proposed for welding dissimilar steels and much research has developed on welding metallurgy; therefore, this article is aimed at a review of the most recent scientific literature on issues relating to the fusion welding of ferritic/austenitic steels. Two specific sections are dedicated, respectively, to electric arc and laser beam welding; finally, metallurgical issues, related to dilution and thermal field are debated in the discussion section.
Full article
(This article belongs to the Special Issue Advanced Welding Processes, Additive Manufacturing and Numerical Models)
►▼
Show Figures
Figure 1
Open AccessReview
Condition Monitoring in Additive Manufacturing: A Critical Review of Different Approaches
by
Khalil Khanafer, Junqian Cao and Hussein Kokash
J. Manuf. Mater. Process. 2024, 8(3), 95; https://doi.org/10.3390/jmmp8030095 - 4 May 2024
Abstract
►▼
Show Figures
This critical review provides a comprehensive analysis of various condition monitoring techniques pivotal in additive manufacturing (AM) processes. The reliability and quality of AM components are contingent upon the precise control of numerous parameters and the timely detection of potential defects, such as
[...] Read more.
This critical review provides a comprehensive analysis of various condition monitoring techniques pivotal in additive manufacturing (AM) processes. The reliability and quality of AM components are contingent upon the precise control of numerous parameters and the timely detection of potential defects, such as lamination, cracks, and porosity. This paper emphasizes the significance of in situ monitoring systems—optical, thermal, and acoustic—which continuously evaluate the integrity of the manufacturing process. Optical techniques employing high-speed cameras and laser scanners provide real-time, non-contact assessments of the AM process, facilitating the early detection of layer misalignment and surface anomalies. Simultaneously, thermal imaging techniques, such as infrared sensing, play a crucial role in monitoring complex thermal gradients, contributing to defect detection and process control. Acoustic monitoring methods augmented by advancements in audio analysis and machine learning offer cost-effective solutions for discerning the acoustic signatures of AM machinery amidst variable operational conditions. Finally, machine learning is considered an efficient technique for data processing and has shown great promise in feature extraction.
Full article
Figure 1
Open AccessArticle
Verifying the Accuracy of 3D-Printed Objects Using an Image Processing System
by
Takuya Okamoto and Sharifu Ura
J. Manuf. Mater. Process. 2024, 8(3), 94; https://doi.org/10.3390/jmmp8030094 - 30 Apr 2024
Abstract
►▼
Show Figures
Image processing systems can be used to measure the accuracy of 3D-printed objects. These systems must compare images of the CAD model of the object to be printed with its 3D-printed counterparts to identify any discrepancies. Consequently, the integrity of the accuracy measurement
[...] Read more.
Image processing systems can be used to measure the accuracy of 3D-printed objects. These systems must compare images of the CAD model of the object to be printed with its 3D-printed counterparts to identify any discrepancies. Consequently, the integrity of the accuracy measurement process is heavily dependent on the image processing settings chosen. This study focuses on this issue by developing a customized image processing system. The system generates binary images of a given CAD model and its 3D-printed counterparts and then compares them pixel by pixel to determine the accuracy. Users can experiment with various image processing settings, such as grayscale to binary image conversion threshold, noise reduction parameters, masking parameters, and pixel-fineness adjustment parameters, to see how they affect accuracy. The study concludes that the grayscale to binary image conversion threshold has the most significant impact on accuracy and that the optimal threshold varies depending on the color of the 3D-printed object. The system can also effectively eliminate noise (filament marks) during image processing, ensuring accurate measurements. Additionally, the system can measure the accuracy of highly complex porous structures where the pore size, depth, and distribution are random. The insights gained from this study can be used to develop intelligent systems for the metrology of additive manufacturing.
Full article
Figure 1
Open AccessArticle
Development of Hot-Wire Laser Additive Manufacturing for Dissimilar Materials of Stainless Steel/Aluminum Alloys
by
Keita Marumoto, Takahiro Horai, Daiji Morita, Chisako Oda, Takafumi Fujii, Takashi Yuzawa, Ryogo Koba and Motomichi Yamamoto
J. Manuf. Mater. Process. 2024, 8(3), 93; https://doi.org/10.3390/jmmp8030093 - 30 Apr 2024
Abstract
The formation of brittle intermetallic compounds (IMCs) at the interface between dissimilar materials causes considerable problems. In this study, a multi-material additive manufacturing technique that employs a diode laser and the hot-wire method was developed for stainless steel/aluminum alloys. An Al-Mg aluminum alloy
[...] Read more.
The formation of brittle intermetallic compounds (IMCs) at the interface between dissimilar materials causes considerable problems. In this study, a multi-material additive manufacturing technique that employs a diode laser and the hot-wire method was developed for stainless steel/aluminum alloys. An Al-Mg aluminum alloy filler wire (JIS 5183-WY) was fed on an austenitic stainless-steel plate (JIS SUS304) while varying the laser power and process speed and using paste-type flux and flux-cored wire. The effects of laser power and process speed on phenomena during manufacturing and IMC formation were investigated. Finally, the wall-type multilayer specimens were fabricated under optimized conditions. The suppression of IMC formation to a thickness of less than 2 μm was achieved in the specimens, along with a high interfacial strength of over 120 MPa on average.
Full article
(This article belongs to the Special Issue Advanced Welding Processes, Additive Manufacturing and Numerical Models)
►▼
Show Figures
Figure 1
Open AccessArticle
Analysis of Tool Load Concerning the Cross-Sectional Size of Removed Material
by
Peter Kozový, Miroslav Matuš, Vladimír Bechný, Jozef Holubják, Richard Joch and Michal Šajgalík
J. Manuf. Mater. Process. 2024, 8(3), 92; https://doi.org/10.3390/jmmp8030092 - 30 Apr 2024
Abstract
►▼
Show Figures
High-feed milling (HFM) represents a progressive manufacturing technology that has recently found widespread application across various industries. HFM is characterized by high machining speed, reduced cycle times, increased overall productivity, and increased tool life. Due to its versatility, HFM is a suitable technology
[...] Read more.
High-feed milling (HFM) represents a progressive manufacturing technology that has recently found widespread application across various industries. HFM is characterized by high machining speed, reduced cycle times, increased overall productivity, and increased tool life. Due to its versatility, HFM is a suitable technology for the application of various materials. The study deals with experimental analysis of cutting forces, machined surface integrity, and statistical evaluation in high-feed machining. In the present study, nickel-copper-based alloy (Monel) was chosen as the machined material, employing HFM with a monolithic ceramic milling cutter. The Monel material is characterized by its excellent mechanical properties and chemical resistance in harsh environments. During machining, cutting forces were recorded in three mutually perpendicular directions. This paper delves into the analysis of the impact of the depth of cut (ap), width of cut (ae), and lead-in angle (ε). The chosen evaluation characteristics encompass the tool load, primary profile, and the attained roughness of the machined surface. It is noteworthy that the technology under consideration predominantly aligns with the roughing phase of the manufacturing process. Additionally, the investigation incorporates a statistical analysis of the response surface pertaining to the cutting force components, namely Fx, Fy, Fz, and the resultant cutting force F.
Full article
Figure 1
Open AccessArticle
Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process
by
Alexander Legenstein and Ewald Fauster
J. Manuf. Mater. Process. 2024, 8(3), 91; https://doi.org/10.3390/jmmp8030091 - 29 Apr 2024
Abstract
Laser-assisted automated tape placement systems are currently the state of the art regarding thermoplastic tape placement. Flashlamp heating systems are rather new in this field of application and offer high energy density with low safety requirements and moderate costs compared to laser-assisted automated
[...] Read more.
Laser-assisted automated tape placement systems are currently the state of the art regarding thermoplastic tape placement. Flashlamp heating systems are rather new in this field of application and offer high energy density with low safety requirements and moderate costs compared to laser-assisted automated tape placement systems. In this study, the effect of processing parameters on interlaminar bonding of carbon fiber-reinforced polyamide 6 tapes is investigated using a flashlamp heating system. The temperature during placement is monitored using an infrared camera, and the bonding strength is characterized by a wedge peel test. The bonding quality of the tapes placed between 210 °C and 330 °C at a lay-up speed of 50 mm/s is investigated. Thermogravimetric analysis, differential scanning calorimetry, and micrographs are used to investigate the material properties and effects of the processing conditions on the thermophysical properties and geometric properties of the tape. No significant changes in the thermophysical or geometric properties were found. Moisture within the tapes and staining of the quartz guides of the flashlamp system have significant influence on the bonding strength. The highest wedge peel strength of dried tapes was found at around 330 °C.
Full article
(This article belongs to the Topic Advanced Composites Manufacturing and Plastics Processing)
►▼
Show Figures
Figure 1
Open AccessArticle
An Experiment-Based Variable Compensation Method to Improve the Geometric Accuracy of Sub-Mm Features Fabricated by Stereolithography (SLA)
by
Francesco Modica, Vito Basile and Irene Fassi
J. Manuf. Mater. Process. 2024, 8(3), 90; https://doi.org/10.3390/jmmp8030090 - 29 Apr 2024
Abstract
In this paper, we present an experimental procedure to enhance the dimensional accuracy of fabrication via stereolithography (SLA) of features at the sub-mm scale. Deviations in sub-mm hemispherical cavity diameters were detected and measured on customized samples by confocal microscopy. The characterization and
[...] Read more.
In this paper, we present an experimental procedure to enhance the dimensional accuracy of fabrication via stereolithography (SLA) of features at the sub-mm scale. Deviations in sub-mm hemispherical cavity diameters were detected and measured on customized samples by confocal microscopy. The characterization and experimental observations of samples allowed the identification of inaccuracy sources, mainly due to the laser beam scanning strategy and the incomplete removal of uncured liquid resin in post-processing (i.e., IPA washing). As a technology baseline, the measured dimensional errors on cavity diameters were up to −46%. A compensation method was defined and implemented, resulting in relevant improvements in dimensional accuracy. However, measurements on sub-mm cavities having different sizes revealed that a constant compensation parameter (i.e., C = 85, 96, 120 μm) is not fully effective at the sub-mm scale, where average errors remain at −24%, −18.8%, and −16% for compensations equal to 85, 96 and 120 μm, respectively. A further experimental campaign allowed the identification of an effective nonlinear compensation law where the compensation parameter depends on the sub-mm feature size C = f(D). Results show a sharp improvement in dimensional accuracy on sub-mm cavity fabrication, with errors consistently below +8.2%. The proposed method can be extended for the fabrication of any sub-mm features without restrictions on the specific technology implementation.
Full article
(This article belongs to the Special Issue Industry 4.0 and Smart Materials Processing for Enhanced Manufacturing)
►▼
Show Figures
Figure 1
Open AccessArticle
Reducing Oxidation during Direct Metal Deposition Process: Effects on Ti6Al4V Microstructure and Mechanical Properties
by
Dominik Keller and Konrad Wegener
J. Manuf. Mater. Process. 2024, 8(3), 89; https://doi.org/10.3390/jmmp8030089 - 28 Apr 2024
Abstract
►▼
Show Figures
The production of materials with a high affinity for oxidation using the direct metal deposition (DMD) process requires an extended process examination that goes beyond the usual, purely energetic consideration, with the aim of providing sufficient energy to melt the substrate and the
[...] Read more.
The production of materials with a high affinity for oxidation using the direct metal deposition (DMD) process requires an extended process examination that goes beyond the usual, purely energetic consideration, with the aim of providing sufficient energy to melt the substrate and the powder material supplied. This is because the DMD process does not allow any conclusions to be drawn as to whether it and its respective selected parameters result in an oxidation critical process. To assess this, a superposition of the temperature field with the existing spatial oxygen concentration is required. This work uses this approach to develop an oxidation model that reduces oxidation during the DMD process. In addition to the numerical model, an analytical model is derived, with which the temperature of a material element can be calculated analytically and the resulting boundary oxygen concentration calculated using Fick’s 2nd law. The model also takes into account two-stage oxidation kinetics for Ti alloys. The effect of too high a travel speed (with the same specific energy of the other experiments) is shown visually in the numerical calculation of the temperature field. However, if the process model is taken into account, the components do fulfil the specified requirements. Finally, the effect of oxidation on the microstructure, microhardness, ultimate strength, yield strength and elongation at failure of Ti6Al4V structures produced using DMD is also investigated, and further supports our conclusions regarding the effectiveness of the proposed model.
Full article
Figure 1
Open AccessArticle
Evaluating the Influence of Tool Material on the Performance of Refill Friction Stir Spot Welds in AA2029
by
Ruth Belnap, Taylor Smith, Paul Blackhurst, Josef Cobb, Heath Misak, John Bosker and Yuri Hovanski
J. Manuf. Mater. Process. 2024, 8(3), 88; https://doi.org/10.3390/jmmp8030088 - 27 Apr 2024
Abstract
Joining high strength 2xxx series aluminum is known to be complex and difficult; these alloys are traditionally considered non-weldable for fusion welding. This paper describes details on welding AA2029-T8 for skin-stiffened structures using refill friction stir spot welding (RFSSW). RFSSW is a solid-state
[...] Read more.
Joining high strength 2xxx series aluminum is known to be complex and difficult; these alloys are traditionally considered non-weldable for fusion welding. This paper describes details on welding AA2029-T8 for skin-stiffened structures using refill friction stir spot welding (RFSSW). RFSSW is a solid-state process invented in the early 2000s that produces spot welds that are strong, lightweight, flush, and hermetic. Cycle times between 1 and 3 s are discussed, and process forces within a range of 8 to 14 kN are demonstrated. Furthermore, lap-shear quasi-static tensile strengths are shown to be between 10 kN and 12 kN in 9 mm diameter spots. A comparison of the performance of RFSSW welds made with various tool materials—which include H13 tool steel, tungsten carbide, and MP159—is detailed. Comparisons of parameters, weld consolidation, and heat-affected zones are presented with discussion related to heat generation specific to each tool material.
Full article
(This article belongs to the Special Issue Recent Developments in Friction Stir Welding Technology and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
An Experimental Procedure to Study the High-Speed Orthogonal Cutting of Unidirectional GFRP
by
Martina Panico, Luca Boccarusso, Antonio Formisano, Giuseppe Villani and Antonio Langella
J. Manuf. Mater. Process. 2024, 8(3), 87; https://doi.org/10.3390/jmmp8030087 - 26 Apr 2024
Abstract
►▼
Show Figures
The aim of this paper is to establish a valid procedure for better understanding all of the phenomena associated with the high-speed machining of glass fiber-reinforced plastic (GFRP) composites. Both rectangular and circular specimens were machined at high cutting speeds (up to 50
[...] Read more.
The aim of this paper is to establish a valid procedure for better understanding all of the phenomena associated with the high-speed machining of glass fiber-reinforced plastic (GFRP) composites. Both rectangular and circular specimens were machined at high cutting speeds (up to 50 m/min) in order to understand what occurred for all values of fiber orientation angles during machining operations. An innovative testing methodology was proposed and studied to investigate the phenomenon of burr formation and thus understand how to avoid it during machining operations. To this end, the forces arising during the machining process and the roughness of the resulting surface were carefully studied and correlated with the cutting angle. Additionally, the cutting surface and chip morphology formed during cutting tests were examined using a high-speed camera. Close correlations were found between the variations in the cutting forces’ signals and the trends of the surface roughness and the morphology of the machined surface.
Full article
Figure 1
Open AccessArticle
Enhanced Energy Absorption with Bioinspired Composite Triply Periodic Minimal Surface Gyroid Lattices Fabricated via Fused Filament Fabrication (FFF)
by
Dawit Bogale Alemayehu and Masahiro Todoh
J. Manuf. Mater. Process. 2024, 8(3), 86; https://doi.org/10.3390/jmmp8030086 - 23 Apr 2024
Abstract
Bio-inspired gyroid triply periodic minimum surface (TPMS) lattice structures have been the focus of research in automotive engineering because they can absorb a lot of energy and have wider plateau ranges. The main challenge is determining the optimal energy absorption capacity and accurately
[...] Read more.
Bio-inspired gyroid triply periodic minimum surface (TPMS) lattice structures have been the focus of research in automotive engineering because they can absorb a lot of energy and have wider plateau ranges. The main challenge is determining the optimal energy absorption capacity and accurately capturing plastic plateau areas using finite element analysis (FEA). Using nTop’s Boolean subtraction method, this study combined walled TPMS gyroid structures with a normal TPMS gyroid lattice. This made a composite TPMS gyroid lattice (CTG) with relative densities ranging from 14% to 54%. Using ideaMaker 4.2.3 (3DRaise Pro 2) software and the fused deposition modeling (FDM) Raise3D Pro 2 3D printer to print polylactic acid (PLA) bioplastics in 1.75 mm filament made it possible to slice computer-aided design (CAD) models and fabricate 36 lattice samples precisely using a layer-by-layer technique. Shimadzu 100 kN testing equipment was utilized for the mechanical compression experiments. The finite element approach validates the results of mechanical compression testing. Further, a composite CTG was examined using a field emission scanning electron microscope (FE-SEM) before and after compression testing. The composite TPMS gyroid lattice showed potential as shock absorbers for vehicles with relative densities of 33%, 38%, and 54%. The Gibson–Ashby model showed that the composite TPMS gyroid lattice deformed mainly by bending, and the size effect was seen when the relative densities were less than 15%. The lattice’s relative density had a significant impact on its ability to absorb energy. The research also explored the use of these innovative foam-like composite TPMS gyroid lattices in high-speed crash box scenarios to potentially enhance vehicle safety and performance. The structures have tremendous potential to improve vehicle safety by acting as advanced shock absorbers, which are particularly effective at higher relative densities.
Full article
(This article belongs to the Special Issue Lattice Structure and Metamaterial Design for Additive Manufacturing)
►▼
Show Figures
Figure 1
Open AccessArticle
Telemetry System to Monitor Elastic Torque on Rolling Stand Spindles
by
Stanislav S. Voronin, Boris M. Loginov, Olga A. Gasiyarova, Sergey A. Evdokimov, Alexander S. Karandaev and Vadim R. Khramshin
J. Manuf. Mater. Process. 2024, 8(3), 85; https://doi.org/10.3390/jmmp8030085 - 23 Apr 2024
Abstract
►▼
Show Figures
This article outlines the relevance of building online telemetry systems for online monitoring of the technical conditions of rolling mill equipment. Electromechanical systems of the horizontal stand of the plate Mill 5000 are described, when operating in harsh conditions caused by the shock
[...] Read more.
This article outlines the relevance of building online telemetry systems for online monitoring of the technical conditions of rolling mill equipment. Electromechanical systems of the horizontal stand of the plate Mill 5000 are described, when operating in harsh conditions caused by the shock loading when workpieces enter the stand. It is noted that dynamic torque overloads, exceeding the rated motor torque by many-fold, cause the fatigue failure of spindle joints and breakage of rolls. In this regard, the development and implementation of systems for monitoring the elastic torque on spindles are extremely urgent. This issue has long been studied, but the references provide no information on the building principles and hardware composition of such systems. The use of strain gauges connected according to a balanced bridge circuit to measure the elastic torque is justified. This paper’s contribution is the proposed modular principle for building a telemetry monitoring system based on the analysis of known techniques for measuring and transmitting diagnostic data. The developed system structure is provided and the concept of data transfer and processing are explained. This article suggests the inductive power supply of a measuring unit mounted on a shaft without the use of batteries. A hardware structure was developed to be applied in a system for measuring, transmitting, and visualizing signals proportional to the elastic torque, manufactured on the basis of data measuring instruments by leading companies. The specifics of placement and connection of strain gauges are considered. The hardware providing a wireless power supply to the signal encoder and digital data transfer between the transmitter and receiver is described. The results of implementing the system on Mill 5000 are provided. The installation of a telemetry ring and a receiving head for the inductive power supply and data reception is shown. An experimental assessment of the elastic torques occurring when workpieces enter the cage was obtained by implementing a drive control algorithm which provided biting in the drive acceleration mode. The reliability of measuring the elastic torque with an error not exceeding ±5% and the reduction of dynamic loads on the spindle by 1.3–1.5 times due to the elimination of impacts from closing angular gaps in spindle joints was confirmed. This increases the service life of mechanical equipment and reduces the cost of eliminating the accident aftermath. The prospect of modifying the developed system into a cyber-physical system for monitoring the rolling mill’s mechatronic equipment conditions is shown.
Full article
Figure 1
Highly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Coatings, Materials, Metals, JMMP, Machines
Development of Friction Stir Welding and Processing
Topic Editors: Yongxian Huang, Li Zhou, Xiangchen Meng, Yuming XieDeadline: 31 May 2024
Topic in
Bioengineering, JMMP, Materials, Micromachines, Polymers
Advances in Filament Engineering for Biomaterials
Topic Editors: Ming-Wei Chang, Zeeshan Ahmad, Hui-Min David WangDeadline: 30 June 2024
Topic in
Applied Sciences, JMMP, Materials, Processes, Sensors
Modern Technologies and Manufacturing Systems, 2nd Volume
Topic Editors: Arkadiusz Gola, Izabela Nielsen, Patrik GrznárDeadline: 31 August 2024
Topic in
Applied Sciences, JMMP, Machines, Processes, Sensors, Technologies
Artificial Intelligence in Smart Industrial Diagnostics and Manufacturing, 2nd Volume
Topic Editors: Kelvin K.L. Wong, Andrew W. H. Ip, Dhanjoo N. Ghista, Wenjun (Chris) ZhangDeadline: 30 September 2024
Conferences
Special Issues
Special Issue in
JMMP
Manufacturing Process Development of Advanced Composite Materials
Guest Editor: Javaid ButtDeadline: 1 June 2024
Special Issue in
JMMP
Advances in Injection Molding: Process, Materials and Applications
Guest Editors: Rossella Surace, Vincenzo Bellantone, Irene FassiDeadline: 1 July 2024
Special Issue in
JMMP
Smart Manufacturing in the Era of Industry 4.0
Guest Editor: Enkhsaikhan BoldsaikhanDeadline: 31 July 2024
Special Issue in
JMMP
Advances in Laser Metal Deposition
Guest Editor: Norbert PirchDeadline: 15 August 2024