Journal Description
Gels
Gels
is an international, peer-reviewed, open access journal on physical and chemical gels published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, CAPlus / SciFinder, and other databases.
- Journal Rank: JCR - Q1 (Polymer Science)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 11.1 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our editors and authors say about the Gels.
Impact Factor:
4.6 (2022);
5-Year Impact Factor:
5.2 (2022)
Latest Articles
Incorporation of Resveratrol-Hydroxypropyl-β-Cyclodextrin Complexes into Hydrogel Formulation for Wound Treatment
Gels 2024, 10(5), 346; https://doi.org/10.3390/gels10050346 (registering DOI) - 18 May 2024
Abstract
Resveratrol could be applied in wound healing therapies because of its antioxidant, anti-inflammatory and antibacterial effects. However, the main limitation of resveratrol is its low aqueous solubility. In this study, resveratrol was included in hydroxypropyl-β-cyclodextrin complexes and further formulated in Pluronic F-127 hydrogels
[...] Read more.
Resveratrol could be applied in wound healing therapies because of its antioxidant, anti-inflammatory and antibacterial effects. However, the main limitation of resveratrol is its low aqueous solubility. In this study, resveratrol was included in hydroxypropyl-β-cyclodextrin complexes and further formulated in Pluronic F-127 hydrogels for wound treatment therapy. IR-spectroscopy and XRD analysis confirmed the successful incorporation of resveratrol into complexes. The wound-healing ability of these complexes was estimated by a scratch assay on fibroblasts, which showed a tendency for improvement of the effect of resveratrol after complexation. The antimicrobial activity of resveratrol in aqueous dispersion and in the complexes was evaluated on methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli, and Candida albicans strains. The results revealed a twofold decrease in the MIC and stronger inhibition of the metabolic activity of MRSA after treatment with resveratrol in the complexes compared to the suspended drug. Furthermore, the complexes were included in Pluronic hydrogel, which provided efficient drug release and appropriate viscoelastic properties. The formulated hydrogel showed excellent biocompatibility which was confirmed via skin irritation test on rabbits. In conclusion, Pluronic hydrogel containing resveratrol included in hydroxypropyl-β-cyclodextrin complexes is a promising topical formulation for further studies directed at wound therapy.
Full article
(This article belongs to the Special Issue Advances in Chemistry and Physics of Hydrogels)
►
Show Figures
Open AccessReview
A Review of Weak Gel Fracturing Fluids for Deep Shale Gas Reservoirs
by
Shichu Yang, Weichu Yu, Mingwei Zhao, Fei Ding and Ying Zhang
Gels 2024, 10(5), 345; https://doi.org/10.3390/gels10050345 (registering DOI) - 18 May 2024
Abstract
Low-viscosity slickwater fracturing fluids are a crucial technology for the commercial development of shallow shale gas. However, in deep shale gas formations with high pressure, a higher sand concentration is required to support fractures. Linear gel fracturing fluids and crosslinked gel fracturing fluids
[...] Read more.
Low-viscosity slickwater fracturing fluids are a crucial technology for the commercial development of shallow shale gas. However, in deep shale gas formations with high pressure, a higher sand concentration is required to support fractures. Linear gel fracturing fluids and crosslinked gel fracturing fluids have a strong sand-carrying capacity, but the drag reduction effect is poor, and it needs to be pre-prepared to decrease the fracturing cost. Slick water fracturing fluids have a strong drag reduction effect and low cost, but their sand-carrying capacity is poor and the fracturing fluid sand ratio is low. The research and development of viscous slick water fracturing fluids solves this problem. It can be switched on-line between a low-viscosity slick water fracturing fluid and high-viscosity weak gel fracturing fluid, which significantly reduces the cost of single-well fracturing. A polyacrylamide drag reducer is the core additive of slick water fracturing fluids. By adjusting its concentration, the control of the on-line viscosity of fracturing fluid can be realized, that is, ‘low viscosity for drag reduction, high viscosity for sand-carrying’. Therefore, this article introduces the research and application status of a linear gel fracturing fluid, crosslinked gel fracturing fluid, and slick water fracturing fluid for deep shale gas reservoirs, and focuses on the research status of a viscous slick water fracturing fluid and viscosity-controllable polyacrylamide drag reducer, with the aim of providing valuable insights for the research on water-based fracturing fluids in the stimulation of deep shale gas reservoirs.
Full article
(This article belongs to the Special Issue Advanced Gels for Oil Recovery)
►▼
Show Figures
Figure 1
Open AccessEditorial
Editorial for the Special Issue Titled “Design of Polymeric Hydrogels Biomaterials”
by
Ana Paula Serro, Maria Vivero-Lopez and Diana C. Silva
Gels 2024, 10(5), 344; https://doi.org/10.3390/gels10050344 (registering DOI) - 18 May 2024
Abstract
Hydrogels have attracted great interest in the biomedical applications field in recent years [...]
Full article
(This article belongs to the Special Issue Design of Polymeric Hydrogels Biomaterials)
Open AccessArticle
Usefulness of Capillary Gel Electrophoresis-Based PCR for Detection of Clostridioides difficile Strains with Hypervirulent Ribotypes
by
Tomasz Bogiel, Alicja Dura, Marcin Woźniak, Agnieszka Mikucka and Piotr Kanarek
Gels 2024, 10(5), 343; https://doi.org/10.3390/gels10050343 - 17 May 2024
Abstract
Clostridioides difficile is a complex of anaerobic bacteria responsible for the epidemics of post-antibiotic diarrhea as one of the examples of CDI (Clostridioides difficile infection). As many as 70% of cases concern hospitalized patients, particularly those in intensive care units. Ribotyping is
[...] Read more.
Clostridioides difficile is a complex of anaerobic bacteria responsible for the epidemics of post-antibiotic diarrhea as one of the examples of CDI (Clostridioides difficile infection). As many as 70% of cases concern hospitalized patients, particularly those in intensive care units. Ribotyping is one of the most common methods for differentiating bacterial strains. The purpose of this work was to show the effectiveness of the gel electrophoresis-based PCR ribotyping method and the Webribo database for typing C. difficile isolates, including the hypervirulent 027 ribotype. DNA samples extracted from 69 C. difficile strains with previously marked genotypes were included in this study. PCR was performed using 16S–23S primers, and capillary gel electrophoresis was performed on the Applied Biosystem 3130xl Genetic Analyzer. The Webribo database was applied for ribotype assignment. Out of 69 samples, 48 belonged to already known ribotypes, 13 represented new ribotypes and 8 was indicated as similar to the existing ones, having some differences. Capillary gel electrophoresis-based PCR is an effective method for the differentiation of C. difficile ribotypes and can be recognized as a very useful tool in epidemiological studies, while the Webribo database is a useful and an accessible database for a quick analysis of C. difficile ribotypes.
Full article
(This article belongs to the Special Issue Multifunctional Polymer Nano-, Micro- and Hydro- Gels: Synthesis, Properties and Applications)
►▼
Show Figures
Figure 1
Open AccessReview
Transforming Medicinal Oil into Advanced Gel: An Update on Advancements
by
Rahul Maurya, Lakshminarayana Misro, Thirupataiah Boini, Thulasi Radhakrishnan, Parvathy G. Nair, Sudesh N. Gaidhani and Ankit Jain
Gels 2024, 10(5), 342; https://doi.org/10.3390/gels10050342 - 17 May 2024
Abstract
The present study delves into the evolution of traditional Ayurvedic oil preparations through innovative strategies to develop advanced gel formulations, aiming at amplifying their therapeutic efficacy. Ayurvedic oils have a rich historical context in healing practices, yet their conversion into contemporary gel-based formulations
[...] Read more.
The present study delves into the evolution of traditional Ayurvedic oil preparations through innovative strategies to develop advanced gel formulations, aiming at amplifying their therapeutic efficacy. Ayurvedic oils have a rich historical context in healing practices, yet their conversion into contemporary gel-based formulations represents a revolutionary approach to augment their medicinal potential. The primary objective of this transformation is to leverage scientific advancements and modern pharmaceutical techniques to enhance the application, absorption, and overall therapeutic impact of these traditional remedies. By encapsulating the essential constituents of Ayurvedic oils within gel matrices, these novel strategies endeavor to improve their stability, bioavailability, and targeted delivery mechanisms. This review highlights the fusion of traditional Ayurvedic wisdom with cutting-edge pharmaceutical technology, paving the way for more effective and accessible utilization of these revered remedies in modern healthcare.
Full article
(This article belongs to the Special Issue Advanced Hydrogels in Drug Delivery and Wound Healing)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Tissue Regeneration and Remodeling in Rat Models after Application of Hypericum perforatum L. Extract-Loaded Bigels
by
Yoana Sotirova, Yoana Kiselova-Kaneva, Deyana Vankova, Oskan Tasinov, Diana Ivanova, Hristo Popov, Minka Hristova, Krastena Nikolova and Velichka Andonova
Gels 2024, 10(5), 341; https://doi.org/10.3390/gels10050341 - 17 May 2024
Abstract
The wound-healing effect of St. John’s Wort (SJW) is mainly attributed to hyperforin (HP), but its low stability restricts its topical administration. This study investigates how “free” HP-rich SJW extract (incorporated into a bigel; B/SJW) and extract “protected” by nanostructured lipid carriers (also
[...] Read more.
The wound-healing effect of St. John’s Wort (SJW) is mainly attributed to hyperforin (HP), but its low stability restricts its topical administration. This study investigates how “free” HP-rich SJW extract (incorporated into a bigel; B/SJW) and extract “protected” by nanostructured lipid carriers (also included in a biphasic semisolid; B/NLC-SJW) affect tissue regeneration in a rat skin excision wound model. Wound diameter, histological changes, and tissue gene expression levels of fibronectin (Fn), matrix metalloproteinase 8 (MMP8), and tumor necrosis factor-alpha (TNF-α) were employed to quantify the healing progress. A significant wound size reduction was achieved after applying both extract-containing semisolids, but after a 21-day application period, the smallest wound size was observed in the B/NLC-SJW-treated animals. However, the inflammatory response was affected more favorably by the bigel containing the “free” SJW extract, as evidenced by histological studies. Moreover, after the application of B/SJW, the expression of Fn, MMP8, and TNF-α was significantly higher than in the positive control. In conclusion, both bigel formulations exhibited beneficial effects on wound healing in rat skin, but B/SJW affected skin restoration processes in a comprehensive and more efficient way.
Full article
(This article belongs to the Special Issue Hydrogels for Therapeutic Delivery: Current Developments and Future Directions)
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of Drying Conditions and Jojoba Oil Incorporation on the Selected Physical Properties of Hydrogel Whey Protein-Based Edible Films
by
Sabina Galus, Magdalena Karwacka, Agnieszka Ciurzyńska and Monika Janowicz
Gels 2024, 10(5), 340; https://doi.org/10.3390/gels10050340 - 17 May 2024
Abstract
Edible hydrogel coatings or films in comparison to conventional food packaging materials are characterized as thin layers obtained from biopolymers that can be applied or enveloped onto the surface of food products. The use of lipid-containing hydrogel packaging materials, primarily as edible protective
[...] Read more.
Edible hydrogel coatings or films in comparison to conventional food packaging materials are characterized as thin layers obtained from biopolymers that can be applied or enveloped onto the surface of food products. The use of lipid-containing hydrogel packaging materials, primarily as edible protective coatings for food applications, is recognized for their excellent barrier capacity against water vapor during storage. With the high brittleness of waxes and the oxidation of different fats or oils, highly stable agents are desirable. Jojoba oil obtained from the jojoba shrub is an ester of long-chain fatty acids and monovalent, long-chain alcohols, which contains natural oxidants α, β, and δ tocopherols; therefore, it is resistant to oxidation and shows high thermal stability. The production of hydrogel films and coatings involves solvent evaporation, which may occur in ambient or controlled drying conditions. The study aimed to determine the effect of drying conditions (temperature from 20 to 70 °C and relative humidity from 30 to 70%) and jojoba oil addition at the concentrations of 0, 0.5, 1.0, 1.5, and 2.0% on the selected physical properties of hydrogel edible films based on whey protein isolate. Homogenization resulted in stable, film-forming emulsions with bimodal lipid droplet distribution and a particle size close to 3 and 45 µm. When higher drying temperatures were used, the drying time was much shorter (minimum 2 h for temperature of 70 °C and relative humidity of 30%) and a more compact structure, lower water content (12.00–13.68%), and better mechanical resistance (3.48–3.93 MPa) of hydrogel whey protein films were observed. The optimal conditions for drying hydrogel whey protein films are a temperature of 50 °C and an air humidity of 30% over 3 h. Increasing the content of jojoba oil caused noticeable color changes (total color difference increased from 2.00 to 2.43 at 20 °C and from 2.58 to 3.04 at 70 °C), improved mechanical elasticity (the highest at 60 °C from 48.4 to 101.1%), and reduced water vapor permeability (the highest at 70 °C from 9.00·10−10 to 6.35·10−10 g/m·s·Pa) of the analyzed films. The observations of scanning electron micrographs showed the heterogeneity of the film surface and irregular distribution of lipid droplets in the film matrix.
Full article
(This article belongs to the Special Issue Gel Technology for Development of Bioactive Foodstuffs)
►▼
Show Figures
Figure 1
Open AccessArticle
Denaturing Gradient Gel Electrophoresis Approach for Microbial Shift Analysis in Thermophilic and Mesophilic Anaerobic Digestions
by
Pramod Pandey, Dhrubajyoti Chowdhury and Yi Wang
Gels 2024, 10(5), 339; https://doi.org/10.3390/gels10050339 - 16 May 2024
Abstract
To determine the evolution of microbial community and microbial shift under anaerobic processes, this study investigates the use of denaturing gradient gel electrophoresis (DGGE). In the DGGE, short- and medium-sized DNA fragments are separated based on their melting characteristics, and this technique is
[...] Read more.
To determine the evolution of microbial community and microbial shift under anaerobic processes, this study investigates the use of denaturing gradient gel electrophoresis (DGGE). In the DGGE, short- and medium-sized DNA fragments are separated based on their melting characteristics, and this technique is used in this study to understand the dominant bacterial community in mesophilic and thermophilic anaerobic digestion processes. Dairy manure is known for emitting greenhouse gases (GHGs) such as methane, and GHG emissions from manure is a biological process that is largely dependent on the manure conditions, microbial community presence in manure, and their functions. Additional efforts are needed to understand the GHG emissions from manure and develop control strategies to minimize the biological GHG emissions from manure. To study the microbial shift during anaerobic processes responsible for GHG emission, we conducted a series of manure anaerobic digestion experiments, and these experiments were conducted in lab-scale reactors operated under various temperature conditions (28 °C, 36 °C, 44 °C, and 52 °C). We examined the third variable region (V3) of the 16S rRNA gene fingerprints of bacterial presence in anaerobic environment by PCR amplification and DGGE separation. Results showed that bacterial community was affected by the temperature conditions and anaerobic incubation time of manure. The microbial community structure of the original manure changed over time during anaerobic processes, and the community composition changed substantially with the temperature of the anaerobic process. At Day 0, the sequence similarity confirmed that most of the bacteria were similar (>95%) to Acinetobacter sp. (strain: ATCC 31012), a Gram-negative bacteria, regardless of temperature conditions. At day 7, the sequence similarity of DNA fragments of reactors (28 °C) was similar to Acinetobacter sp.; however, the DNA fragments of effluent of reactors at 44 °C and 52 °C were similar to Coprothermobacter proteolyticus (strain: DSM 5265) (similarity: 97%) and Tepidimicrobium ferriphilum (strain: DSM 16624) (similarity: 100%), respectively. At day 60, the analysis showed that DNA fragments of effluent of 28 °C reactor were similar to Galbibacter mesophilus (strain: NBRC 10162) (similarity: 87%), and DNA fragments of effluent of 36 °C reactors were similar to Syntrophomonas curvata (strain: GB8-1) (similarity: 91%). In reactors with a relatively higher temperature, the DNA fragments of effluent of 44 °C reactor were similar to Dielma fastidiosa (strain: JC13) (similarity: 86%), and the DNA fragments of effluent of 52 °C reactor were similar to Coprothermobacter proteolyticus (strain: DSM 5265) (similarity: 99%). To authors’ knowledge, this is one of the few studies where DGGE-based approach is utilized to study and compare microbial shifts under mesophilic and thermophilic anaerobic digestions of manure simultaneously. While there were challenges in identifying the bands during gradient gel electrophoresis, the joint use of DGGE and sequencing tool can be potentially useful for illustrating and comparing the change in microbial community structure under complex anaerobic processes and functionality of microbes for understanding the consequential GHG emissions from manure.
Full article
(This article belongs to the Special Issue Gels for Water Treatment)
►▼
Show Figures
Graphical abstract
Open AccessReview
Chemical and Physical Architecture of Macromolecular Gels for Fracturing Fluid Applications in the Oil and Gas Industry; Current Status, Challenges, and Prospects
by
Majad Khan
Gels 2024, 10(5), 338; https://doi.org/10.3390/gels10050338 - 16 May 2024
Abstract
Hydraulic fracturing is vital in recovering hydrocarbons from oil and gas reservoirs. It involves injecting a fluid under high pressure into reservoir rock. A significant part of fracturing fluids is the addition of polymers that become gels or gel-like under reservoir conditions. Polymers
[...] Read more.
Hydraulic fracturing is vital in recovering hydrocarbons from oil and gas reservoirs. It involves injecting a fluid under high pressure into reservoir rock. A significant part of fracturing fluids is the addition of polymers that become gels or gel-like under reservoir conditions. Polymers are employed as viscosifiers and friction reducers to provide proppants in fracturing fluids as a transport medium. There are numerous systems for fracturing fluids based on macromolecules. The employment of natural and man-made linear polymers, and also, to a lesser extent, synthetic hyperbranched polymers, as additives in fracturing fluids in the past one to two decades has shown great promise in enhancing the stability of fracturing fluids under various challenging reservoir conditions. Modern innovations demonstrate the importance of developing chemical structures and properties to improve performance. Key challenges include maintaining viscosity under reservoir conditions and achieving suitable shear-thinning behavior. The physical architecture of macromolecules and novel crosslinking processes are essential in addressing these issues. The effect of macromolecule interactions on reservoir conditions is very critical in regard to efficient fluid qualities and successful fracturing operations. In future, there is the potential for ongoing studies to produce specialized macromolecular solutions for increased efficiency and sustainability in oil and gas applications.
Full article
(This article belongs to the Special Issue Polymer Gels for the Oil and Gas Industry)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Preparation and Performance Evaluation of Temperature-Resistant and Salt-Resistant Gels
by
Xudong Li, Meilong Fu and Jiani Hu
Gels 2024, 10(5), 337; https://doi.org/10.3390/gels10050337 - 16 May 2024
Abstract
In order to improve the plugging performance of high-temperature and high-salt oil reservoir plugging agents, this paper utilizes a copolymer composed of acrylamide and 2-acrylamide-2-methylpropanesulfonic acid (AM/AMPS) as the polymer, polyethyleneimine as the cross-linking agent, and nylon fiber as the stabilizer to develop
[...] Read more.
In order to improve the plugging performance of high-temperature and high-salt oil reservoir plugging agents, this paper utilizes a copolymer composed of acrylamide and 2-acrylamide-2-methylpropanesulfonic acid (AM/AMPS) as the polymer, polyethyleneimine as the cross-linking agent, and nylon fiber as the stabilizer to develop a high-temperature- and high-salt-resistant gel system. This study analyzed and evaluated the temperature resistance, salt resistance and blocking performance of the gel system. The evaluation results show that the gel-forming strength of this gel system can reach an H level, and it has good thermal stability at the high temperature of 130 °C. At the high salinity of 240,720 mg/L, the syneresis rate remains below 2.5%, and the gel-forming time is greater than 15 h; the higher the temperature, the shorter the gelling time. The results of our sand-filled pipe-plugging experiment show that the gel system can adapt to sand-filled pipes with different levels of permeability, and reaching a plugging rate of 94%.
Full article
(This article belongs to the Special Issue Multifunctional Polymer Nano-, Micro- and Hydro- Gels: Synthesis, Properties and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Sequential Fabrication of a Three-Layer Retina-like Structure
by
Yahel Shechter, Roni Cohen, Michael Namestnikov, Assaf Shapira, Adiel Barak, Aya Barzelay and Tal Dvir
Gels 2024, 10(5), 336; https://doi.org/10.3390/gels10050336 - 15 May 2024
Abstract
Tissue engineering is considered a promising approach to treating advanced degenerative maculopathies such as nonexudative age-related macular degeneration (AMD), the leading cause of blindness worldwide. The retina consists of several hierarchical tissue layers, each of which is supported by a layer underneath. Each
[...] Read more.
Tissue engineering is considered a promising approach to treating advanced degenerative maculopathies such as nonexudative age-related macular degeneration (AMD), the leading cause of blindness worldwide. The retina consists of several hierarchical tissue layers, each of which is supported by a layer underneath. Each of these layers has a different morphology and requires distinct conditions for proper assembly. In fact, a prerequisite step for the assembly of each of these layers is the organization of the layer underneath. Advanced retinal degeneration includes degeneration of the other retina layers, including the choroid, the retinal pigmented epithelium (RPE), and the photoreceptors. Here, we report a step-by-step fabrication process of a three-layer retina-like structure. The process included the 3D printing of a choroid-like structure in an extracellular matrix (ECM) hydrogel, followed by deposition of the RPE monolayer. After the formation of the blood vessel–RPE interface, the photoreceptor cells were deposited to interact with the RPE layer. At the end of the fabrication process, each layer was characterized for its morphology and expression of specific markers, and the integration of the three-layer retina was evaluated. We envision that such a retina-like structure may be able to attenuate the deterioration of a degenerated retina and improve engraftment and regeneration. This retinal implant may potentially be suitable for a spectrum of macular degenerative diseases for which there are currently no cures and may save millions from complete blindness.
Full article
(This article belongs to the Special Issue Advances in Chemistry and Physics of Hydrogels)
►▼
Show Figures
Figure 1
Open AccessArticle
Preparation and Application of High Internal Phase Pickering Emulsion Gels Stabilized by Starch Nanocrystal/Tannic Acid Complex Particles
by
Haoran Jin, Chen Li, Yajuan Sun, Bingtian Zhao and Yunxing Li
Gels 2024, 10(5), 335; https://doi.org/10.3390/gels10050335 - 15 May 2024
Abstract
Herein, the starch nanocrystal/tannic acid (ST) complex particles, which were prepared based on the hydrogen bond between starch nanocrystal (SNC) and tannic acid (TA), were successfully used to stabilize the HIPPE gels. The optimal TA concentration of the ST complex particles resulted in
[...] Read more.
Herein, the starch nanocrystal/tannic acid (ST) complex particles, which were prepared based on the hydrogen bond between starch nanocrystal (SNC) and tannic acid (TA), were successfully used to stabilize the HIPPE gels. The optimal TA concentration of the ST complex particles resulted in better water dispersibility, surface wettability, and interfacial activity as compared to SNC. The hydrogen bond responsible for the formation of ST complex particles and subsequent stable emulsions was demonstrated by varying the pH and ionic strength of the aqueous phase. Notably, the HIPPE gels stabilized via the ST complex particles can maintain long-term stability for up to three months. The HIPPEs stabilized via the ST complex particles all displayed gel-like features and had smaller droplets and denser droplet networks than the SNC-stabilized HIPPEs. The rheological behavior of HIPPE gels stabilized via the ST complex particles can be readily changed by tuning the mass ratio of SNC and TA as well as pH. Finally, the prepared HIPPE gels used to effectively protect encapsulated β-carotene against high temperatures and ultraviolet radiation and its controllable release at room temperature were demonstrated. It is anticipated that the aforementioned findings will provide new perspectives on the preparation of Pickering emulsion for delivery systems.
Full article
(This article belongs to the Special Issue Gel-Related Papers from the 9th Asian Conference on Colloid and Interface Science 2023 (ACCIS 2023))
►▼
Show Figures
Graphical abstract
Open AccessArticle
Xyloglucan–Cellulose Nanocrystals Mixtures: A Case Study of Nanocolloidal Hydrogels and Levers for Tuning Functional Properties
by
Géraldine Rangel, Céline Moreau, Ana Villares, Christophe Chassenieux and Bernard Cathala
Gels 2024, 10(5), 334; https://doi.org/10.3390/gels10050334 - 15 May 2024
Abstract
The development of fully biobased hydrogels obtained by simple routes and in the absence of toxic or environmentally harmful reagents is a major challenge in meeting new societal demands. In this work, we discuss the development of hydrogels made from cellulose nanocrystals (CNCs)
[...] Read more.
The development of fully biobased hydrogels obtained by simple routes and in the absence of toxic or environmentally harmful reagents is a major challenge in meeting new societal demands. In this work, we discuss the development of hydrogels made from cellulose nanocrystals (CNCs) and xyloglucan (XG), two non-toxic, renewable, and biobased components. We present three strategies to fine-tune the functional properties. The first one consists in varying the XG/CNC ratio that leads to the modulation of the mechanical properties of hydrogels as well as a better comprehension of the gel mechanism formation. The second relies on tuning the XG chains’ interaction by enzymatic modification to achieve thermoresponsive systems. Finally, the third one is based on the increase in the hydrogel solid content by osmotic concentration. The high-solid-content gels were found to have very high mechanical properties and self-healing properties that can be used for molding materials. Overall, these approaches are a case study of potential modifications and properties offered by biobased nanocolloidal hydrogels.
Full article
(This article belongs to the Special Issue Cellulose-Based Gels: Synthesis, Properties, and Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
The MnO2/GelMA Composite Hydrogels Improve the ROS Microenvironment of Annulus Fibrosus Cells by Promoting the Antioxidant and Autophagy through the SIRT1/NRF2 Pathway
by
Bohan Xu, Mingxuan Huang, Jiaying Li, Qingchen Meng, Jie Hu, Qianglong Chen, Hui He, Hao Jiang, Fengxuan Han, Bin Meng and Ting Liang
Gels 2024, 10(5), 333; https://doi.org/10.3390/gels10050333 - 15 May 2024
Abstract
Intervertebral disc degeneration (IVDD) is a worldwide disease that causes low back pain and reduces quality of life. Biotherapeutic strategies based on tissue engineering alternatives, such as intervertebral disc scaffolds, supplemented by drug-targeted therapy have brought new hope for IVDD. In this study,
[...] Read more.
Intervertebral disc degeneration (IVDD) is a worldwide disease that causes low back pain and reduces quality of life. Biotherapeutic strategies based on tissue engineering alternatives, such as intervertebral disc scaffolds, supplemented by drug-targeted therapy have brought new hope for IVDD. In this study, to explore the role and mechanism of MnO2/GelMA composite hydrogels in alleviating IVDD, we prepared composite hydrogels with MnO2 and methacrylate gelatin (GelMA) and characterized them using compression testing and transmission electron microscopy (TEM). Annulus fibrosus cells (AFCs) were cultured in the composite hydrogels to verify biocompatibility by live/dead and cytoskeleton staining. Cell viability assays and a reactive oxygen species (ROS) probe were used to analyze the protective effect of the composite hydrogels under oxidative damage. To explore the mechanism of improving the microenvironment, we detected the expression levels of antioxidant and autophagy-related genes and proteins by qPCR and Western blotting. We found that the MnO2/GelMA composite hydrogels exhibited excellent biocompatibility and a porous structure, which promoted cell proliferation. The addition of MnO2 nanoparticles to GelMA cleared ROS in AFCs and induced the expression of antioxidant and cellular autophagy through the common SIRT1/NRF2 pathway. Therefore, the MnO2/GelMA composite hydrogels, which can improve the disc microenvironment through scavenging intracellular ROS and resisting oxidative damage, have great application prospects in the treatment of IVDD.
Full article
(This article belongs to the Special Issue Hydrogels for Therapeutic Delivery: Current Developments and Future Directions)
►▼
Show Figures
Figure 1
Open AccessArticle
Fluoride-Ion-Responsive Sol–Gel Transition in an L-Cysteine/AgNO3 System: Self-Assembly Peculiarities and Anticancer Activity
by
Dmitry V. Vishnevetskii, Yana V. Andrianova, Elizaveta E. Polyakova, Alexandra I. Ivanova and Arif R. Mekhtiev
Gels 2024, 10(5), 332; https://doi.org/10.3390/gels10050332 - 14 May 2024
Abstract
Supramolecular hydrogels based on low-molecular-weight compounds are a unique class of so-called “soft” materials, formed by weak non-covalent interactions between precursors at their millimolar concentrations. Due to the variety of structures that can be formed using different low-molecular-weight gelators, they are widely used
[...] Read more.
Supramolecular hydrogels based on low-molecular-weight compounds are a unique class of so-called “soft” materials, formed by weak non-covalent interactions between precursors at their millimolar concentrations. Due to the variety of structures that can be formed using different low-molecular-weight gelators, they are widely used in various fields of technology and medicine. In this study, we report for the first time an unusual self-assembly process of mixing a hydrosol obtained from L-cysteine and silver nitrate (cysteine–silver sol—CSS) with sodium halides. Modern instrumental techniques such as viscosimetry, UV spectroscopy, dynamic light scattering, zeta potential measurements, SEM and EDS identified that adding fluoride anions to CSS is able to form stable hydrogels of a thixotropic nature, while Cl−, Br− and I− lead to precipitation. The self-assembly process proceeds using a narrow concentration range of F−. An increase in the fluoride anion content in the system leads to a change in the gel network morphology from elongated structures to spherical ones. This fact is reflected in a decrease in the gel viscosity and a number of gel–sol–gel transition cycles. The mechanism of F−’s interaction with hydrosol includes the condensation of anions on the positive surface of the CSS nanoparticles, their binding via electrostatic forces and the formation of a resulting gel carcass. In vitro analysis showed that the hydrogels suppressed human squamous carcinoma cells at a micromolar sample concentration. The obtained soft gels could have potential applications against cutaneous malignancy and as carriers for fluoride anion and other bioactive substance delivery.
Full article
(This article belongs to the Special Issue Synthesis and Applications of Hydrogels (2nd Edition))
►▼
Show Figures
Graphical abstract
Open AccessReview
Dynamic Hydrogels against Infections: From Design to Applications
by
Ming Zhang and Chongyu Zhu
Gels 2024, 10(5), 331; https://doi.org/10.3390/gels10050331 - 14 May 2024
Abstract
Human defense against infection remains a global topic. In addition to developing novel anti-infection drugs, therapeutic drug delivery strategies are also crucial to achieving a higher efficacy and lower toxicity of these drugs for treatment. The application of hydrogels has been proven to
[...] Read more.
Human defense against infection remains a global topic. In addition to developing novel anti-infection drugs, therapeutic drug delivery strategies are also crucial to achieving a higher efficacy and lower toxicity of these drugs for treatment. The application of hydrogels has been proven to be an effective localized drug delivery approach to treating infections without generating significant systemic adverse effects. The recent emerging dynamic hydrogels further show power as injectable formulations, giving new tools for clinical treatments. In this review, we delve into the potential applications of dynamic hydrogels in antibacterial and antiviral treatments and elaborate on their molecular designs and practical implementations. By outlining the chemical designs underlying these hydrogels, we discuss how the choice of dynamic chemical bonds affects their stimulus responsiveness, self-healing capabilities, and mechanical properties. Afterwards, we focus on how to endow dynamic hydrogels with anti-infection properties. By comparing different drug-loading methods, we highlight the advantages of dynamic chemical bonds in achieving sustained and controlled drug release. Moreover, we also include the design principles and uses of hydrogels that possess inherent anti-infective properties. Furthermore, we explore the design principles and applications of hydrogels with inherent anti-infective properties. Finally, we briefly summarize the current challenges faced by dynamic hydrogels and present a forward-looking vision for their future development. Through this review, we expect to draw more attention to these therapeutic strategies among scientists working with chemistry, materials, as well as pharmaceutics.
Full article
(This article belongs to the Special Issue State-of-the-Art Gel Research in China)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Sulfated Hydrogels as Primary Intervertebral Disc Cell Culture Systems
by
Paola Bermudez-Lekerika, Katherine B. Crump, Karin Wuertz-Kozak, Christine L. Le Maitre and Benjamin Gantenbein
Gels 2024, 10(5), 330; https://doi.org/10.3390/gels10050330 - 14 May 2024
Abstract
The negatively charged extracellular matrix plays a vital role in intervertebral disc tissues, providing specific cues for cell maintenance and tissue hydration. Unfortunately, suitable biomimetics for intervertebral disc regeneration are lacking. Here, sulfated alginate was investigated as a 3D culture material due to
[...] Read more.
The negatively charged extracellular matrix plays a vital role in intervertebral disc tissues, providing specific cues for cell maintenance and tissue hydration. Unfortunately, suitable biomimetics for intervertebral disc regeneration are lacking. Here, sulfated alginate was investigated as a 3D culture material due to its similarity to the charged matrix of the intervertebral disc. Precursor solutions of standard alginate, or alginate with 0.1% or 0.2% degrees of sulfation, were mixed with primary human nucleus pulposus cells, cast, and cultured for 14 days. A 0.2% degree of sulfation resulted in significantly decreased cell density and viability after 7 days of culture. Furthermore, a sulfation-dependent decrease in DNA content and metabolic activity was evident after 14 days. Interestingly, no significant differences in cell density and viability were observed between surface and core regions for sulfated alginate, unlike in standard alginate, where the cell number was significantly higher in the core than in the surface region. Due to low cell numbers, phenotypic evaluation was not achieved in sulfated alginate biomaterial. Overall, standard alginate supported human NP cell growth and viability superior to sulfated alginate; however, future research on phenotypic properties is required to decipher the biological properties of sulfated alginate in intervertebral disc cells.
Full article
(This article belongs to the Special Issue Hydrogels for the Regeneration of Joints of the Musculoskeletal System in Orthopedics)
►▼
Show Figures
Figure 1
Open AccessArticle
Development of Improved Confined Compression Testing Setups for Use in Stress Relaxation Testing of Viscoelastic Biomaterials
by
Anthony El Kommos, Alicia R. Jackson, Fotios Andreopoulos and Francesco Travascio
Gels 2024, 10(5), 329; https://doi.org/10.3390/gels10050329 - 13 May 2024
Abstract
The development of cell-based biomaterial alternatives holds significant promise in tissue engineering applications, but it requires accurate mechanical assessment. Herein, we present the development of a novel 3D-printed confined compression apparatus, fabricated using clear resin, designed to cater to the unique demands of
[...] Read more.
The development of cell-based biomaterial alternatives holds significant promise in tissue engineering applications, but it requires accurate mechanical assessment. Herein, we present the development of a novel 3D-printed confined compression apparatus, fabricated using clear resin, designed to cater to the unique demands of biomaterial developers. Our objective was to enhance the precision of force measurements and improve sample visibility during compression testing. We compared the performance of our innovative 3D-printed confined compression setup to a conventional setup by performing stress relaxation testing on hydrogels with variable degrees of crosslinking. We assessed equilibrium force, aggregate modulus, and peak force. This study demonstrates that our revised setup can capture a larger range of force values while simultaneously improving accuracy. We were able to detect significant differences in force and aggregate modulus measurements of hydrogels with variable degrees of crosslinking using our revised setup, whereas these were indistinguishable with the convectional apparatus. Further, by incorporating a clear resin in the fabrication of the compression chamber, we improved sample visibility, thus enabling real-time monitoring and informed assessment of biomaterial behavior under compressive testing.
Full article
(This article belongs to the Special Issue Hydrogels for the Regeneration of Joints of the Musculoskeletal System in Orthopedics)
►▼
Show Figures
Figure 1
Open AccessArticle
Study of the Synthesis of Multi-Cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Co-Ni-O Aerogels and Their Catalytic Activity in the Dry Reforming of Methane
by
Jaroslav Cihlar, Serhii Tkachenko, Vendula Bednarikova, Jaroslav Cihlar, Jr., Klara Castkova, Martin Trunec and Ladislav Celko
Gels 2024, 10(5), 328; https://doi.org/10.3390/gels10050328 - 11 May 2024
Abstract
Dense multi-cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Ni-Co-O oxide aerogels were prepared by epoxide-driven sol–gel synthesis. Catalysts for dry reformation of methane, Sm2O3/Co, Sm2O3/Ni, Al2O3/Co, Al2O3/Ni, Al
[...] Read more.
Dense multi-cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Ni-Co-O oxide aerogels were prepared by epoxide-driven sol–gel synthesis. Catalysts for dry reformation of methane, Sm2O3/Co, Sm2O3/Ni, Al2O3/Co, Al2O3/Ni, Al2O3/Co, and Ni were prepared by reduction of aerogels with hydrogen and their catalytic activities and C-deposition during dry reformation of methane were tested. Catalytic tests showed high methane conversion (93–98%) and C-deposition (0.01–4.35 mg C/gcat.h). The highest content of C-deposits after catalytic tests was determined for Al2O3/Co and Al2O3/Ni catalysts, which was related to the formation of Al alloys with Co and Ni. A uniform distribution of Co0 and Ni0 nanoparticles (in the form of a CoNi alloy) was found only for the Al2O3/Co and Ni catalysts, which showed the highest activity as well as low C deposition.
Full article
(This article belongs to the Special Issue Chemical Properties and Application of Gel Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Ceramic Fiber-Reinforced Polyimide Aerogel Composites with Improved Shape Stability against Shrinkage
by
Wanlin Shi, Mengmeng Wan, Yating Tang and Weiwang Chen
Gels 2024, 10(5), 327; https://doi.org/10.3390/gels10050327 - 10 May 2024
Abstract
Polyimide (PI) aerogels, renowned for their nano-porous structure and exceptional performance across a spectrum of applications, often encounter significant challenges during fabrication, primarily due to severe shrinkage. In this study, we innovatively incorporated ceramic fibers of varying diameters into the PI aerogel matrix
[...] Read more.
Polyimide (PI) aerogels, renowned for their nano-porous structure and exceptional performance across a spectrum of applications, often encounter significant challenges during fabrication, primarily due to severe shrinkage. In this study, we innovatively incorporated ceramic fibers of varying diameters into the PI aerogel matrix to enhance the shape stability against shrinkage. The
structure of the resulting ceramic fiber-reinforced PI (CF-PI) aerogel composites as well as their performance in thermal decomposition, thermal insulation, and compression resistance were characterized. The results revealed that the CF-PI aerogel composites dried by supercritical ethanol achieved greatly reduced shrinkage as low as 5.0 vol.% and low thermal conductivity ranging from 31.2 mW·m−1·K−1 to 35.3 mW·m−1·K−1, showcasing their excellent performance in shape stability and thermal insulation. These composites also inherited the superior residue-forming ability of ceramic fibers and the robust mechanical attributes of PI, thereby exhibiting enhanced thermal stability and compression resistance. Besides, the effects of different drying conditions on the structure and properties of CF-PI aerogels were also discussed. The coupling use of supercritical ethanol drying with the addition of ceramic fibers is preferred. This preferred condition gives birth to low-shrinkage CF-PI aerogel composites, which also stand out for their integrated advantages include high thermal stability, low thermal conductivity, and high mechanical strength. These advantages attribute to CF-PI aerogel composites substantial potential for a wide range of applications, particularly as high-performance thermal insulation materials for extreme conditions. Full article
structure of the resulting ceramic fiber-reinforced PI (CF-PI) aerogel composites as well as their performance in thermal decomposition, thermal insulation, and compression resistance were characterized. The results revealed that the CF-PI aerogel composites dried by supercritical ethanol achieved greatly reduced shrinkage as low as 5.0 vol.% and low thermal conductivity ranging from 31.2 mW·m−1·K−1 to 35.3 mW·m−1·K−1, showcasing their excellent performance in shape stability and thermal insulation. These composites also inherited the superior residue-forming ability of ceramic fibers and the robust mechanical attributes of PI, thereby exhibiting enhanced thermal stability and compression resistance. Besides, the effects of different drying conditions on the structure and properties of CF-PI aerogels were also discussed. The coupling use of supercritical ethanol drying with the addition of ceramic fibers is preferred. This preferred condition gives birth to low-shrinkage CF-PI aerogel composites, which also stand out for their integrated advantages include high thermal stability, low thermal conductivity, and high mechanical strength. These advantages attribute to CF-PI aerogel composites substantial potential for a wide range of applications, particularly as high-performance thermal insulation materials for extreme conditions. Full article
(This article belongs to the Special Issue Recent Progress and Development of Advanced Aerogels: Latest Processing Methods, Improved Properties and Application)
►▼
Show Figures
Graphical abstract
Journal Menu
► ▼ Journal Menu-
- Gels Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Conferences
Special Issues
Special Issue in
Gels
Gel for Oil-Based Drilling Fluid
Guest Editor: Jintang WangDeadline: 20 May 2024
Special Issue in
Gels
Physically Cross-Linked Gels and Their Applications
Guest Editors: Regina R. Vildanova, Sergey V. Kolesov, Vitaliy V. KhutoryanskiyDeadline: 30 May 2024
Special Issue in
Gels
Dynamics of Polymeric Gels
Guest Editors: Shensheng Chen, Domenico LarobinaDeadline: 20 June 2024
Special Issue in
Gels
Flocculation and Electrokinetics in Bioresources and Environment: Related to Gels
Guest Editors: Kazuyoshi Ogawa, Yasuhisa Adachi, Hiroyuki OhshimaDeadline: 30 June 2024
Topical Collections
Topical Collection in
Gels
Recent Advances and Future Perspectives in Stimuli-Responsive Gels
Collection Editors: Dirk Kuckling, Sandra Van Vlierberghe
Topical Collection in
Gels
Recent Advances and Future Perspectives in Organogels and Organogelators Research
Collection Editor: Jean-Michel Guenet
Topical Collection in
Gels
Hydrogel in Tissue Engineering and Regenerative Medicine
Collection Editor: Esmaiel Jabbari